NTN 6007 ZJEM

Deep groove ball · Open

The seat — 35 MM × 62 MM × 14 MM

Bore

35 MM

Outside dia

62 MM

Width

14 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

16.8 kN

Static C0

10.2 kN

101 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 10 designations

Part number	Manufacturer	C	C0
6007-2RZ	NTN	16.8 kN	10.2 kN
6007 JEM	NTN	16.8 kN	10.2 kN
6007 N	NTN	16.8 kN	10.2 kN
6007 RSJEM	NTN	16.8 kN	10.2 kN
PER.6007-2RLD	NTN	16.2 kN	10.4 kN
PER.6007-2RLDV2	NTN	16.2 kN	10.4 kN
PER.6007-DV2-A	NTN	16.2 kN	10.4 kN
6007	NTN	15.9 kN	10.2 kN
91007K	Timken	15.9 kN	10.2 kN
W 6007	NTN	13.8 kN	10.2 kN

Check before substituting — 91 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1007 ECP	NTN	41.5 kN	Type: Cylindrical — this part: Deep groove ball
NU 1007 ECP/C3	NTN	41.5 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 1007 ECPH	NTN	41.5 kN	Type: Cylindrical — this part: Deep groove ball
NU 1007 ECPH/HC5C3	NTN	35.8 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C5 — this part: CN (Normal)
6007-2RS1	NTN	16.8 kN	Seal: 2RS contact seal — this part: Open
6007-2RS1/C3	NTN	16.8 kN	Clearance: C3 — this part: CN (Normal)
6007-2RS1/C3GJN	NTN	16.8 kN	Clearance: C3 — this part: CN (Normal)
6007-2RS1/GFJ	NTN	16.8 kN	Seal: 2RS contact seal — this part: Open
6007-2RS1/GJN	NTN	16.8 kN	Seal: 2RS contact seal — this part: Open
6007-2RS1NR	NTN	16.8 kN	Seal: 2RS contact seal — this part: Open
6007-2RSFTN9/C3GJN	NTN	16.8 kN	Clearance: C3 — this part: CN (Normal)
6007-2RZ/C3LT	NTN	16.8 kN	Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/6007ZJEM/SUBSTITUTE