KOYO (JTEKT) 6010-2RZ

Deep groove ball · 2Z shield

The seat — 50 MM × 80 MM × 16 MM

Bore

50 MM

Outside dia

80 MM

Width

16 MM

Type

Deep groove ball

Seal

2Z shield

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

22.9 kN

Static C0

15.6 kN

107 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 10 designations

Part number	Manufacturer	C	C0
6010-2Z	NTN	22.9 kN	15.6 kN
6010-2Z/GJN	NTN	22.9 kN	15.6 kN
6010-Z	NTN	22.9 kN	15.6 kN
6010 2ZJEM	NTN	22.9 kN	15.6 kN
6010 2ZNRJEM	NTN	22.9 kN	16.0 kN
6010ZZ	NTN	22.9 kN	15.6 kN
91010KDD	Timken	22.9 kN	15.6 kN
W 6010-2Z	NTN	19.0 kN	16.6 kN
6010.2ZR	FAG (Schaeffler)	18.0 kN	11.7 kN
6010-2Z/VA208	NTN	—	15.6 kN

Check before substituting — 97 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1010 ECP	NTN	53.0 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield
NU 1010 ML	NTN	36.5 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield
NU 1010 ML/C3	NTN	36.5 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
N 1010 KTN/HC5SP	NTN	30.8 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield Clearance: C5 — this part: CN (Normal)
N 1010 TN/SP	NTN	30.8 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield
N 1010 KTNHA/HC5SP	NTN	29.7 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield Clearance: C5 — this part: CN (Normal)
N 1010 KTNHA/SP	NTN	29.7 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield
7010 CD/HCP4A	NTN	29.6 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7010 CD/P4A	NTN	29.6 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7010 CDGA/HCP4A	NTN	29.6 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7010 CDGA/P4A	NTN	29.6 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7010 CDGB/HCP4A	NTN	29.6 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/6010-2RZ/SUBSTITUTE