NTN 6014-2RS1

Deep groove ball · 2RS contact seal

The seat — 70 MM × 110 MM × 20 MM

Bore

70 MM

Outside dia

110 MM

Width

20 MM

Type

Deep groove ball

Seal

2RS contact seal

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

39.7 kN

Static C0

31.0 kN

112 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 8 designations

Part number	Manufacturer	C	C0
6014-2RS1/MTVM121	NTN	39.7 kN	31.0 kN
6014-RS1	NTN	39.7 kN	31.0 kN
6014 2RSJEM	NTN	39.7 kN	31.0 kN
6014 2RSNRJEM	NTN	39.7 kN	31.0 kN
6014.2RSR	FAG (Schaeffler)	28.4 kN	19.2 kN
60142RS	Timken	27.8 kN	18.8 kN
6014DDU	NSK	27.5 kN	18.6 kN
6014LLU	NTN	27.3 kN	18.4 kN

Check before substituting — 104 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1014 ECP	NTN	86.5 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
NU 1014 ECMR/HC5C4	NTN	76.5 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal Clearance: C5 — this part: CN (Normal)
NU 1014 ML	NTN	64.0 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
N 1014 KTN/SP	NTN	57.2 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
N 1014 KTN/SPVR592	NTN	57.2 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
N 1014 TN/SP	NTN	57.2 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
N 1014 KTNHA/HC5SP	NTN	55.0 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal Clearance: C5 — this part: CN (Normal)
N 1014 KTNHA/SP	NTN	55.0 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
N 1014 KPHA/HC5SP	NTN	53.9 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal Clearance: C5 — this part: CN (Normal)
N 1014 KPHA/HC5SPVR592	NTN	53.9 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal Clearance: C5 — this part: CN (Normal)
N 1014 KPHA/SP	NTN	53.9 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
N 1014 KPHA/SPVR522	NTN	53.9 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2RS contact seal

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/6014-2RS1/SUBSTITUTE