NTN 7007 ACDGA/P4A

Angular · Open

The seat — 35 MM × 62 MM × 14 MM

Bore

35 MM

Outside dia

62 MM

Width

14 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

14.8 kN

Static C0

9.0 kN

101 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 41 designations · top 20 shown

Part number	Manufacturer	C	C0
7007 CD/HCP4A	NTN	15.6 kN	9.5 kN
7007 CD/P4A	NTN	15.6 kN	9.5 kN
7007 CDGA/HCP4A	NTN	15.6 kN	9.5 kN
7007 CDGA/P4A	NTN	15.6 kN	9.5 kN
7007 CDGB/P4A	NTN	15.6 kN	9.5 kN
7007 CDGC/HCP4A	NTN	15.6 kN	9.5 kN
7007 CDGC/P4A	NTN	15.6 kN	9.5 kN
S7007 CDGA/HCP4A	NTN	15.6 kN	9.5 kN
S7007 CDGA/P4A	NTN	15.6 kN	9.5 kN
S7007 CDGB/HCP4A	NTN	15.6 kN	9.5 kN
S7007 CDGB/P4A	NTN	15.6 kN	9.5 kN
7007/VA9D1	NTN	14.8 kN	9.0 kN
7007 ACD/HCP4A	NTN	14.8 kN	9.0 kN
7007 ACD/P4A	NTN	14.8 kN	9.0 kN
7007 ACDGA/HCP4A	NTN	14.8 kN	9.0 kN
7007 ACDGB/HCP4A	NTN	14.8 kN	9.0 kN
7007 ACDGB/P4A	NTN	14.8 kN	9.0 kN
7007 ACDGC/P4A	NTN	14.8 kN	9.0 kN
7007 ACDGD/P4A	NTN	14.8 kN	9.0 kN
S7007 ACDGA/HCP4A	NTN	14.8 kN	9.0 kN

Check before substituting — 60 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1007 ECP	NTN	41.5 kN	Type: Cylindrical — this part: Angular
NU 1007 ECP/C3	NTN	41.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 1007 ECPH	NTN	41.5 kN	Type: Cylindrical — this part: Angular
NU 1007 ECPH/HC5C3	NTN	35.8 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
6007-2RS1	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6007-2RS1/C3	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6007-2RS1/C3GJN	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6007-2RS1/GFJ	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6007-2RS1/GJN	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6007-2RS1NR	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6007-2RSFTN9/C3GJN	NTN	16.8 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6007-2RZ	NTN	16.8 kN	Type: Deep groove ball — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7007ACDGA%2FP4A/SUBSTITUTE