NTN 7014 CDGATP/P4B

Angular · Open

The seat — 70 MM × 110 MM × 20 MM

Bore

70 MM

Outside dia

110 MM

Width

20 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

52.0 kN

Static C0

45.5 kN

112 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 63 designations · top 20 shown

Part number	Manufacturer	C	C0
7014 CD/HCP4A	NTN	52.0 kN	45.5 kN
7014 CD/P4A	NTN	52.0 kN	45.5 kN
7014 CDGA/HCP4A	NTN	52.0 kN	45.5 kN
7014 CDGA/P4A	NTN	52.0 kN	45.5 kN
7014 CDGB/HCP4A	NTN	52.0 kN	45.5 kN
7014 CDGB/P4A	NTN	52.0 kN	45.5 kN
7014 CDGC/HCP4A	NTN	52.0 kN	45.5 kN
7014 CDGC/P4A	NTN	52.0 kN	45.5 kN
S7014 CD/P4A	NTN	52.0 kN	45.5 kN
S7014 CDGA/HCP4A	NTN	52.0 kN	45.5 kN
S7014 CDGA/P4A	NTN	52.0 kN	45.5 kN
S7014 CDGB/HCP4A	NTN	52.0 kN	45.5 kN
S7014 CDGB/P4A	NTN	52.0 kN	45.5 kN
S7014 CDGC/P4A	NTN	52.0 kN	45.5 kN
7014 ACD/P4A	NTN	48.8 kN	44.0 kN
7014 ACDGA/HCP4A	NTN	48.8 kN	44.0 kN
7014 ACDGA/HCP4AL	NTN	48.8 kN	44.0 kN
7014 ACDGA/P4A	NTN	48.8 kN	44.0 kN
7014 ACDGA/P4AL	NTN	48.8 kN	44.0 kN
7014 ACDGATP/P4B	NTN	48.8 kN	44.0 kN

Check before substituting — 49 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1014 ECP	NTN	86.5 kN	Type: Cylindrical — this part: Angular
NU 1014 ECMR/HC5C4	NTN	76.5 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
NU 1014 ML	NTN	64.0 kN	Type: Cylindrical — this part: Angular
N 1014 KTN/SP	NTN	57.2 kN	Type: Cylindrical — this part: Angular
N 1014 KTN/SPVR592	NTN	57.2 kN	Type: Cylindrical — this part: Angular
N 1014 TN/SP	NTN	57.2 kN	Type: Cylindrical — this part: Angular
N 1014 KTNHA/HC5SP	NTN	55.0 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1014 KTNHA/SP	NTN	55.0 kN	Type: Cylindrical — this part: Angular
N 1014 KPHA/HC5SP	NTN	53.9 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1014 KPHA/HC5SPVR592	NTN	53.9 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1014 KPHA/SP	NTN	53.9 kN	Type: Cylindrical — this part: Angular
N 1014 KPHA/SPVR522	NTN	53.9 kN	Type: Cylindrical — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7014CDGATP%2FP4B/SUBSTITUTE