NTN 7015 CEGA/P4A

Angular · Open

The seat — 75 MM × 115 MM × 20 MM

Bore

75 MM

Outside dia

115 MM

Width

20 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

26.0 kN

Static C0

21.6 kN

75 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 30 designations · top 20 shown

Part number	Manufacturer	C	C0
7015 CD/P4A	NTN	52.7 kN	49.0 kN
7015 CDGA/HCP4A	NTN	52.7 kN	49.0 kN
7015 CDGA/P4A	NTN	52.7 kN	49.0 kN
7015 CDGB/P4A	NTN	52.7 kN	49.0 kN
7015 CDGC/P4A	NTN	52.7 kN	49.0 kN
S7015 CD/P4A	NTN	52.7 kN	49.0 kN
S7015 CDGA/HCP4A	NTN	52.7 kN	49.0 kN
S7015 CDGA/P4A	NTN	52.7 kN	49.0 kN
S7015 CDGB/P4A	NTN	52.7 kN	49.0 kN
7015 ACD/P4A	NTN	49.4 kN	46.5 kN
7015 ACDGA/HCP4A	NTN	49.4 kN	46.5 kN
7015 ACDGA/P4A	NTN	49.4 kN	46.5 kN
7015 ACDGB/P4A	NTN	49.4 kN	46.5 kN
7015 ACDGC/P4A	NTN	49.4 kN	46.5 kN
S7015 ACD/HCP4A	NTN	49.4 kN	46.5 kN
S7015 ACD/P4A	NTN	49.4 kN	46.5 kN
S7015 ACDGA/HCP4A	NTN	49.4 kN	46.5 kN
S7015 ACDGA/P4A	NTN	49.4 kN	46.5 kN
S7015 ACDGB/P4A	NTN	49.4 kN	46.5 kN
7015 CEGA/HCP4A	NTN	26.0 kN	21.6 kN

Check before substituting — 45 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1015 ML	NTN	67.0 kN	Type: Cylindrical — this part: Angular
NU 1015 ML/C3	NTN	67.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 1015 M/HC5C4	NTN	58.3 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1015 KTN/HC5SP	NTN	56.1 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1015 KTN/SP	NTN	56.1 kN	Type: Cylindrical — this part: Angular
N 1015 KTN/VQ497	NTN	56.1 kN	Type: Cylindrical — this part: Angular
N 1015 KPHA/HC5SP	NTN	52.8 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1015 KPHA/SP	NTN	52.8 kN	Type: Cylindrical — this part: Angular
N 1015 KPHA/SPVR522	NTN	52.8 kN	Type: Cylindrical — this part: Angular
6015-2RS1	NTN	41.6 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6015-2RS1/C3	NTN	41.6 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6015-2RS1/C3GJN	NTN	41.6 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7015CEGA%2FP4A/SUBSTITUTE