NTN 7016 ACDGA/HCP4A

Angular · Open

The seat — 80 MM × 125 MM × 22 MM

Bore

80 MM

Outside dia

125 MM

Width

22 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

62.4 kN

Static C0

58.5 kN

88 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 44 designations · top 20 shown

Part number	Manufacturer	C	C0
7016 CD/HCP4A	NTN	65.0 kN	61.0 kN
7016 CD/P4A	NTN	65.0 kN	61.0 kN
7016 CDGA/HCP4A	NTN	65.0 kN	61.0 kN
7016 CDGA/P4A	NTN	65.0 kN	61.0 kN
7016 CDGATP/P4B	NTN	65.0 kN	61.0 kN
7016 CDGB/P4A	NTN	65.0 kN	61.0 kN
7016 CDGC/P4A	NTN	65.0 kN	61.0 kN
7016 CDGD/P4A	NTN	65.0 kN	61.0 kN
S7016 CD/HCP4A	NTN	65.0 kN	61.0 kN
S7016 CD/P4A	NTN	65.0 kN	61.0 kN
S7016 CDGA/HCP4A	NTN	65.0 kN	61.0 kN
S7016 CDGA/P4A	NTN	65.0 kN	61.0 kN
S7016 CDGB/P4A	NTN	65.0 kN	61.0 kN
7016 ACD/P4A	NTN	62.4 kN	58.5 kN
7016 ACDGA/HCP4AL	NTN	62.4 kN	58.5 kN
7016 ACDGA/P4A	NTN	62.4 kN	58.5 kN
7016 ACDGA/P4AL	NTN	62.4 kN	58.5 kN
7016 ACDGATP/P4B	NTN	62.4 kN	58.5 kN
7016 ACDGB/HCP4A	NTN	62.4 kN	58.5 kN
7016 ACDGB/P4A	NTN	62.4 kN	58.5 kN

Check before substituting — 44 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 1016 ECML/C3	NTN	112.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 1016 ECML	NTN	112.0 kN	Type: Cylindrical — this part: Angular
NU 1016	NTN	73.5 kN	Type: Cylindrical — this part: Angular
N 1016 KTN/VQ497	NTN	69.3 kN	Type: Cylindrical — this part: Angular
N 1016 TN/SP	NTN	69.3 kN	Type: Cylindrical — this part: Angular
NU 1016 MR/HC5C4	NTN	69.3 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1016 KTNHA/HC5SP	NTN	67.1 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1016 KTNHA/SP	NTN	67.1 kN	Type: Cylindrical — this part: Angular
N 1016 KPHA/HC5SP	NTN	66.0 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1016 KPHA/HC5SPVE587A	NTN	66.0 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1016 KPHA/SP	NTN	66.0 kN	Type: Cylindrical — this part: Angular
N 1016 KPHA/SPVR522	NTN	66.0 kN	Type: Cylindrical — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7016ACDGA%2FHCP4A/SUBSTITUTE