NTN 71816 ACDGB/P4

Angular · Open

The seat — 80 MM × 100 MM × 10 MM

Bore

80 MM

Outside dia

100 MM

Width

10 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

13.8 kN

Static C0

17.0 kN

25 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 10 designations

Part number	Manufacturer	C	C0
71816 CD/HCP4	NTN	14.6 kN	18.3 kN
71816 CD/P4	NTN	14.6 kN	18.3 kN
71816 CDGA/HCP4	NTN	14.6 kN	18.3 kN
71816 CDGA/P4	NTN	14.6 kN	18.3 kN
71816 CDGB/P4	NTN	14.6 kN	18.3 kN
71816 CDGC/P4	NTN	14.6 kN	18.3 kN
71816 ACD/HCP4	NTN	13.8 kN	17.0 kN
71816 ACD/P4	NTN	13.8 kN	17.0 kN
71816 ACDGA/P4	NTN	13.8 kN	17.0 kN
71816 ACDGC/P4	NTN	13.8 kN	17.0 kN

Check before substituting — 15 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
61816	NTN	12.7 kN	Type: Deep groove ball — this part: Angular
61816-2RS1	NTN	12.7 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
61816-2RZ	NTN	12.7 kN	Type: Deep groove ball — this part: Angular
6816.2RSR	FAG (Schaeffler)	10.9 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6816.2ZR	FAG (Schaeffler)	10.9 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
6816.C3	FAG (Schaeffler)	10.9 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6816-2RS1	NTN	10.8 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6816-2Z	NTN	10.8 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
6816/C3	NTN	10.8 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
68162RS	Timken	10.7 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6816DDU	NSK	10.6 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6816	NTN	10.5 kN	Type: Deep groove ball — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/71816ACDGB%2FP4/SUBSTITUTE