NTN 71900 ACDGC/P4A

Angular · Open

The seat — 10 MM × 22 MM × 6 MM

Bore

10 MM

Outside dia

22 MM

Width

6 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

2.4 kN

Static C0

1.1 kN

45 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 19 designations

Part number	Manufacturer	C	C0
71900 CD/HCP4A	NTN	2.5 kN	1.1 kN
71900 CD/P4A	NTN	2.5 kN	1.1 kN
71900 CDGA/HCP4A	NTN	2.5 kN	1.1 kN
71900 CDGA/P4A	NTN	2.5 kN	1.1 kN
71900 CDGB/P4A	NTN	2.5 kN	1.1 kN
71900 ACD/HCP4A	NTN	2.4 kN	1.1 kN
71900 ACD/P4A	NTN	2.4 kN	1.1 kN
71900 ACDGA/HCP4A	NTN	2.4 kN	1.1 kN
71900 ACDGA/P4A	NTN	2.4 kN	1.1 kN
71900 ACDGB/P4A	NTN	2.4 kN	1.1 kN
S71900 ACDGA/P4A	NTN	2.4 kN	1.1 kN
71900 CE/HCP4A	NTN	2.0 kN	0.8 kN
71900 CEGA/HCP4A	NTN	2.0 kN	0.8 kN
71900 CEGA/P4A	NTN	2.0 kN	0.8 kN
71900 CEGB/HCP4A	NTN	2.0 kN	0.8 kN
71900 CEGB/P4A	NTN	2.0 kN	0.8 kN
71900 ACE/P4A	NTN	1.9 kN	0.8 kN
71900 ACEGA/P4A	NTN	1.9 kN	0.8 kN
71900 ACEGB/P4A	NTN	1.9 kN	0.8 kN

Check before substituting — 26 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
61900	NTN	2.7 kN	Type: Deep groove ball — this part: Angular
61900-2RS1	NTN	2.7 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
61900-2Z	NTN	2.7 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
DDR-2210X2	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular
DDR-2210X2HH	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
DDRF-2210X2HH	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
R-2210X3DD	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
R-2210X3KK	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular
R-2210X3SS	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular
RNR-2210X9KKSD21	MinebeaMitsumi (NMB)	2.7 kN	Type: Deep groove ball — this part: Angular
W 61900	NTN	2.3 kN	Type: Deep groove ball — this part: Angular
W 61900-2RS1	NTN	2.3 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/71900ACDGC%2FP4A/SUBSTITUTE