NTN 71917 ACEGA/HCP4AL

Angular · Open

The seat — 85 MM × 120 MM × 18 MM

Bore

85 MM

Outside dia

120 MM

Width

18 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

28.1 kN

Static C0

21.6 kN

27 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 25 designations · top 20 shown

Part number	Manufacturer	C	C0
71917 CD/HCP4A	NTN	46.2 kN	48.0 kN
71917 CD/P4A	NTN	46.2 kN	48.0 kN
71917 CDGA/HCP4A	NTN	46.2 kN	48.0 kN
71917 CDGA/P4A	NTN	46.2 kN	48.0 kN
71917 CDGB/P4A	NTN	46.2 kN	48.0 kN
71917 CDGC/P4A	NTN	46.2 kN	48.0 kN
S71917 CDGA/P4A	NTN	46.2 kN	48.0 kN
71917 ACD/P4A	NTN	43.6 kN	45.5 kN
71917 ACDGA/HCP4A	NTN	43.6 kN	45.5 kN
71917 ACDGA/P4A	NTN	43.6 kN	45.5 kN
71917 ACDGB/P4A	NTN	43.6 kN	45.5 kN
71917 ACDGC/P4A	NTN	43.6 kN	45.5 kN
S71917 ACD/P4A	NTN	43.6 kN	45.5 kN
S71917 ACDGA/HCP4A	NTN	43.6 kN	45.5 kN
S71917 ACDGA/P4A	NTN	43.6 kN	45.5 kN
S71917 ACDGB/P4A	NTN	43.6 kN	45.5 kN
71917 CEGA/HCP4A	NTN	29.6 kN	22.8 kN
71917 CEGA/P4A	NTN	29.6 kN	22.8 kN
S71917 CEGA/HCP4A	NTN	29.6 kN	22.8 kN
S71917 CEGA/P4A	NTN	29.6 kN	22.8 kN

Check before substituting — 2 designations

Part number	Manufacturer	C	Differs from this part
61917	NTN	31.9 kN	Type: Deep groove ball — this part: Angular
61917/C3	NTN	31.9 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/71917ACEGA%2FHCP4AL/SUBSTITUTE