NTN 71920 CD/P4ADFB

Angular · Open

The seat — 100 MM × 140 MM × 40 MM

Bore

100 MM

Outside dia

140 MM

Width

40 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

97.5 kN

Static C0

132.0 kN

47 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 35 designations · top 20 shown

Part number	Manufacturer	C	C0
71920 CD/HCP4ADGA	NTN	97.5 kN	132.0 kN
71920 CD/P4ADBA	NTN	97.5 kN	132.0 kN
71920 CD/P4ADBB	NTN	97.5 kN	132.0 kN
71920 CD/P4ADBC	NTN	97.5 kN	132.0 kN
71920 CD/P4ADGA	NTN	97.5 kN	132.0 kN
71920 CD/P4ADGB	NTN	97.5 kN	132.0 kN
S71920 CD/HCP4ADGA	NTN	97.5 kN	132.0 kN
S71920 CD/P4ADBA	NTN	97.5 kN	132.0 kN
S71920 CD/P4ADGA	NTN	97.5 kN	132.0 kN
71920 ACD/HCP4ADGA	NTN	92.3 kN	125.0 kN
71920 ACD/HCP4ADGC	NTN	92.3 kN	125.0 kN
71920 ACD/P4ADBB	NTN	92.3 kN	125.0 kN
71920 ACD/P4ADGA	NTN	92.3 kN	125.0 kN
71920 ACD/P4ADGB	NTN	92.3 kN	125.0 kN
71920 ACD/P4ADGC	NTN	92.3 kN	125.0 kN
S71920 ACD/HCP4ADGA	NTN	92.3 kN	125.0 kN
S71920 ACD/P4ADGA	NTN	92.3 kN	125.0 kN
71920 CE/HCP4ADGA	NTN	63.7 kN	63.0 kN
71920 CE/HCP4ADT	NTN	63.7 kN	63.0 kN
71920 CE/P4ADBB	NTN	63.7 kN	63.0 kN

Check before substituting — 12 designations

Part number	Manufacturer	C	Differs from this part
NNC 4920 CV	NTN	209.0 kN	Type: Cylindrical — this part: Angular
NNCF 4920 CV	NTN	209.0 kN	Type: Cylindrical — this part: Angular
NNCL 4920 CV	NTN	209.0 kN	Type: Cylindrical — this part: Angular
NA 4920	NTN	143.0 kN	Type: Needle — this part: Angular
NNU 4920 B/SPW33	NTN	128.0 kN	Type: Cylindrical — this part: Angular
NNU 4920 BK/SPW33	NTN	128.0 kN	Type: Cylindrical — this part: Angular
NA4920U	IKO (Nippon Thompson)	—	Type: Needle — this part: Angular
NA4920UU	IKO (Nippon Thompson)	—	Type: Needle — this part: Angular Seal: 2RS contact seal — this part: Open
NAG4920	IKO (Nippon Thompson)	—	Type: Needle — this part: Angular
NAG4920UU	IKO (Nippon Thompson)	—	Type: Needle — this part: Angular Seal: 2RS contact seal — this part: Open
NAU4920	IKO (Nippon Thompson)	—	Type: Needle — this part: Angular
NAU4920UU	IKO (Nippon Thompson)	—	Type: Needle — this part: Angular Seal: 2RS contact seal — this part: Open

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/71920CD%2FP4ADFB/SUBSTITUTE