NTN 71922 CEGB/P4A

Angular · Open

The seat — 110 MM × 150 MM × 20 MM

Bore

110 MM

Outside dia

150 MM

Width

20 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

40.3 kN

Static C0

34.5 kN

33 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 29 designations · top 20 shown

Part number	Manufacturer	C	C0
71922 CD/P4A	NTN	62.4 kN	72.0 kN
71922 CDGA/HCP4A	NTN	62.4 kN	72.0 kN
71922 CDGA/P4A	NTN	62.4 kN	72.0 kN
71922 CDGB/P4A	NTN	62.4 kN	72.0 kN
S71922 CDGA/HCP4A	NTN	62.4 kN	72.0 kN
S71922 CDGA/P4A	NTN	62.4 kN	72.0 kN
71922 ACD/P4A	NTN	58.5 kN	68.0 kN
71922 ACDGA/HCP4A	NTN	58.5 kN	68.0 kN
71922 ACDGA/HCP4AL	NTN	58.5 kN	68.0 kN
71922 ACDGA/P4A	NTN	58.5 kN	68.0 kN
71922 ACDGB/P4A	NTN	58.5 kN	68.0 kN
71922 ACDGC/P4A	NTN	58.5 kN	68.0 kN
S71922 ACDGA/HCP4A	NTN	58.5 kN	68.0 kN
S71922 ACDGA/P4A	NTN	58.5 kN	68.0 kN
S71922 ACDGC/P4A	NTN	58.5 kN	68.0 kN
71922 CE/HCP4A	NTN	40.3 kN	34.5 kN
71922 CEGA/HCP4A	NTN	40.3 kN	34.5 kN
71922 CEGA/P4A	NTN	40.3 kN	34.5 kN
S71922 CEGA/HCP4A	NTN	40.3 kN	34.5 kN
S71922 CEGA/P4A	NTN	40.3 kN	34.5 kN

Check before substituting — 4 designations

Part number	Manufacturer	C	Differs from this part
61922	NTN	43.6 kN	Type: Deep groove ball — this part: Angular
61922 MA	NTN	43.6 kN	Type: Deep groove ball — this part: Angular
61922 MA/C3	NTN	43.6 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
KDN.K11020CP0	NTN	18.8 kN	Type: Deep groove ball — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/71922CEGB%2FP4A/SUBSTITUTE