NTN 7205 BECBM

Angular · Open

The seat — 25 MM × 52 MM × 15 MM

Bore

25 MM

Outside dia

52 MM

Width

15 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

15.6 kN

Static C0

10.0 kN

161 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 35 designations · top 20 shown

Part number	Manufacturer	C	C0
BSA 205 CGA	NTN	22.4 kN	52.0 kN
BSA 205 CGB	NTN	22.4 kN	52.0 kN
7205 ACCBM	NTN	18.0 kN	11.4 kN
7205 BECBPH	NTN	15.6 kN	10.0 kN
7205 BECBY	NTN	15.6 kN	10.0 kN
7205 BEGAP	NTN	15.6 kN	10.0 kN
7205 BEGAY	NTN	15.6 kN	10.0 kN
7205 BEGBY	NTN	15.6 kN	10.0 kN
7205 BEGC-2RZP	NTN	15.6 kN	10.0 kN
7205 BE-2RZP	NTN	14.8 kN	9.3 kN
7205 BEP	NTN	14.8 kN	9.3 kN
7205 BEY	NTN	14.8 kN	9.3 kN
7205 B.TVP	FAG (Schaeffler)	14.1 kN	7.2 kN
7205	NTN	14.0 kN	8.8 kN
7205-B-XL-TVP	FAG (Schaeffler)	14.0 kN	8.8 kN
7205A	NSK	14.0 kN	8.8 kN
7205B	Timken	14.0 kN	8.8 kN
7205 BECBP	NTN	14.0 kN	7.1 kN
7205 BEA	NTN	13.6 kN	6.9 kN
7205 CD/HCP4A	NTN	13.5 kN	7.2 kN

Check before substituting — 126 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
BC1-0312	NTN	32.5 kN	Type: Cylindrical — this part: Angular
N 205 ECP	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NJ 205 ECJ	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NJ 205 ECML	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NJ 205 ECP	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NJ 205 ECP/C3	NTN	32.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 205 ECPH	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NU 205 ECJ/C3M	NTN	32.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 205 ECML	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NU 205 ECP	NTN	32.5 kN	Type: Cylindrical — this part: Angular
NU 205 ECP/C3	NTN	32.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 205 ECPHA	NTN	32.5 kN	Type: Cylindrical — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7205BECBM/SUBSTITUTE