NTN 7208 BEGAP

Angular · Open

The seat — 40 MM × 80 MM × 18 MM

Bore

40 MM

Outside dia

80 MM

Width

18 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

36.5 kN

Static C0

26.0 kN

189 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 39 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 208 MA	NTN	56.0 kN	49.0 kN
QJ 208	NTN	55.3 kN	48.0 kN
305943	NTN	52.7 kN	45.0 kN
BSA 208 CGA	NTN	42.5 kN	112.0 kN
BSA 208 CGB	NTN	42.5 kN	112.0 kN
7208 ACCBM	NTN	41.5 kN	29.0 kN
7208 BECBJ	NTN	36.5 kN	26.0 kN
7208 BECBM	NTN	36.5 kN	26.0 kN
7208 BECBP	NTN	36.5 kN	26.0 kN
7208 BECBY	NTN	36.5 kN	26.0 kN
7208 BEGBY	NTN	36.5 kN	26.0 kN
7208 BE-2RZP	NTN	34.5 kN	24.0 kN
7208 BECBM/W64	NTN	34.5 kN	24.0 kN
7208 BECBY/W64	NTN	34.5 kN	24.0 kN
7208 BEP	NTN	34.5 kN	24.0 kN
7208 CD/HCP4A	NTN	33.8 kN	24.0 kN
7208 CD/P4A	NTN	33.8 kN	24.0 kN
7208 CDGA/HCP4A	NTN	33.8 kN	24.0 kN
7208 CDGA/P4A	NTN	33.8 kN	24.0 kN
7208 CDGB/HCP4A	NTN	33.8 kN	24.0 kN

Check before substituting — 150 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 208 ECP	NTN	62.0 kN	Type: Cylindrical — this part: Angular
N 208 ECPH	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NJ 208 ECJ	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NJ 208 ECJ/C3	NTN	62.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 208 ECM	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NJ 208 ECM/C3	NTN	62.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 208 ECML	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NJ 208 ECP	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NJ 208 ECP/C3	NTN	62.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 208 ECPH	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NU 208 ECJ	NTN	62.0 kN	Type: Cylindrical — this part: Angular
NU 208 ECJ/C3	NTN	62.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7208BEGAP/SUBSTITUTE