NTN 7209 ACCBM

Angular · Open

The seat — 45 MM × 85 MM × 19 MM

Bore

45 MM

Outside dia

85 MM

Width

19 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

44.0 kN

Static C0

32.0 kN

160 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 34 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 209 MA	NTN	63.0 kN	56.0 kN
BSA 209 CGA	NTN	45.0 kN	134.0 kN
BSA 209 CGB	NTN	45.0 kN	134.0 kN
7209 CD/HCP4A	NTN	42.3 kN	31.0 kN
7209 CD/P4A	NTN	42.3 kN	31.0 kN
7209 CDGA/HCP4A	NTN	42.3 kN	31.0 kN
7209 CDGA/P4A	NTN	42.3 kN	31.0 kN
7209 CDGB/P4A	NTN	42.3 kN	31.0 kN
S7209 CD/P4A	NTN	42.3 kN	31.0 kN
S7209 CDGA/HCP4A	NTN	42.3 kN	31.0 kN
S7209 CDGA/P4A	NTN	42.3 kN	31.0 kN
7209 ACD/P4A	NTN	41.0 kN	30.0 kN
7209 ACDGA/HCP4A	NTN	41.0 kN	30.0 kN
7209 ACDGA/P4A	NTN	41.0 kN	30.0 kN
7209 ACDGB/P4A	NTN	41.0 kN	30.0 kN
7209 ACDGC/P4A	NTN	41.0 kN	30.0 kN
S7209 ACD/P4A	NTN	41.0 kN	30.0 kN
S7209 ACDGA/P4A	NTN	41.0 kN	30.0 kN
S7209 ACDGB/P4A	NTN	41.0 kN	30.0 kN
S7209 ACDGC/P4A	NTN	41.0 kN	30.0 kN

Check before substituting — 126 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 209 ECP	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NJ 209 ECJ	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NJ 209 ECJ/C3	NTN	69.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 209 ECM	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NJ 209 ECML	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NJ 209 ECP	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NJ 209 ECP/C3	NTN	69.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 209 ECJ	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NU 209 ECJ/C3	NTN	69.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 209 ECM	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NU 209 ECML	NTN	69.5 kN	Type: Cylindrical — this part: Angular
NU 209 ECP	NTN	69.5 kN	Type: Cylindrical — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7209ACCBM/SUBSTITUTE