Timken 7210B

Angular · Open

The seat — 50 MM × 90 MM × 20 MM

Bore

50 MM

Outside dia

90 MM

Width

20 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

33.0 kN

Static C0

26.0 kN

175 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 35 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 210 MA	NTN	65.5 kN	61.0 kN
BSA 210 CGA	NTN	46.5 kN	146.0 kN
BSA 210 CGB	NTN	46.5 kN	146.0 kN
7210 ACCBM	NTN	45.5 kN	35.5 kN
7210 CD/HCP4A	NTN	44.9 kN	34.0 kN
7210 CD/P4A	NTN	44.9 kN	34.0 kN
7210 CDGA/HCP4A	NTN	44.9 kN	34.0 kN
7210 CDGA/P4A	NTN	44.9 kN	34.0 kN
7210 CDGB/P4A	NTN	44.9 kN	34.0 kN
S7210 CD/HCP4A	NTN	44.9 kN	34.0 kN
S7210 CDGA/HCP4A	NTN	44.9 kN	34.0 kN
S7210 CDGA/P4A	NTN	44.9 kN	34.0 kN
S7210 CDGB/P4A	NTN	44.9 kN	34.0 kN
7210 ACD/P4A	NTN	42.3 kN	32.5 kN
7210 ACDGA/HCP4A	NTN	42.3 kN	32.5 kN
7210 ACDGA/P4A	NTN	42.3 kN	32.5 kN
7210 ACDGB/P4A	NTN	42.3 kN	32.5 kN
7210 ACDGC/P4A	NTN	42.3 kN	32.5 kN
S7210 ACDGA/HCP4A	NTN	42.3 kN	32.5 kN
S7210 ACDGA/P4A	NTN	42.3 kN	32.5 kN

Check before substituting — 140 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 210 ECP	NTN	73.5 kN	Type: Cylindrical — this part: Angular
NJ 210 ECJ	NTN	73.5 kN	Type: Cylindrical — this part: Angular
NJ 210 ECJ/C3	NTN	73.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 210 ECM	NTN	73.5 kN	Type: Cylindrical — this part: Angular
NJ 210 ECP	NTN	73.5 kN	Type: Cylindrical — this part: Angular
NJ 210 ECP/C3	NTN	73.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 210 ECJ	NTN	73.5 kN	Type: Cylindrical — this part: Angular
NU 210 ECJ/C3	NTN	73.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 210 ECKP/C3	NTN	73.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 210 ECM	NTN	73.5 kN	Type: Cylindrical — this part: Angular
NU 210 ECM/C3	NTN	73.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 210 ECM/C3HVA3091	NTN	73.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7210B/SUBSTITUTE