NTN 7211 ACD/P4A

Angular · Open

The seat — 55 MM × 100 MM × 21 MM

Bore

55 MM

Outside dia

100 MM

Width

21 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

52.7 kN

Static C0

40.5 kN

150 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 35 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 211 MA	NTN	85.0 kN	83.0 kN
7211 ACCBM	NTN	57.0 kN	45.0 kN
7211 CD/HCP4A	NTN	55.3 kN	43.0 kN
7211 CD/P4A	NTN	55.3 kN	43.0 kN
7211 CDGA/HCP4A	NTN	55.3 kN	43.0 kN
7211 CDGA/P4A	NTN	55.3 kN	43.0 kN
7211 CDGB/P4A	NTN	55.3 kN	43.0 kN
S7211 CD/HCP4A	NTN	55.3 kN	43.0 kN
S7211 CDGA/HCP4A	NTN	55.3 kN	43.0 kN
S7211 CDGA/P4A	NTN	55.3 kN	43.0 kN
S7211 CDGB/P4A	NTN	55.3 kN	43.0 kN
7211 ACD/HCP4A	NTN	52.7 kN	40.5 kN
7211 ACDGA/HCP4A	NTN	52.7 kN	40.5 kN
7211 ACDGA/P4A	NTN	52.7 kN	40.5 kN
7211 ACDGB/HCP4A	NTN	52.7 kN	40.5 kN
7211 ACDGB/P4A	NTN	52.7 kN	40.5 kN
7211 ACDGC/P4A	NTN	52.7 kN	40.5 kN
S7211 ACDGB/P4A	NTN	52.7 kN	40.5 kN
S7211 ACDGC/P4A	NTN	52.7 kN	40.5 kN
7211 BECBJ	NTN	49.0 kN	40.0 kN

Check before substituting — 115 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 211 ECP	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NJ 211 ECJ	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NJ 211 ECJ/C3	NTN	96.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 211 ECM	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NJ 211 ECML	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NJ 211 ECML/C3	NTN	96.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 211 ECP	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NJ 211 ECP/C3	NTN	96.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 211 ECP/C5	NTN	96.5 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
NJ 211 ECPH	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NU 211 ECJ	NTN	96.5 kN	Type: Cylindrical — this part: Angular
NU 211 ECJ/C3	NTN	96.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7211ACD%2FP4A/SUBSTITUTE