NTN 7215 ACDGC/P4A

Angular · Open

The seat — 75 MM × 130 MM × 25 MM

Bore

75 MM

Outside dia

130 MM

Width

25 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

68.9 kN

Static C0

58.5 kN

124 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 28 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 215 MA	NTN	125.0 kN	132.0 kN
7215 BECBJ	NTN	73.5 kN	65.5 kN
7215 BECBM	NTN	73.5 kN	65.5 kN
7215 BECBY	NTN	73.5 kN	65.5 kN
7215 BEGAM	NTN	73.5 kN	65.5 kN
7215 BEGAP	NTN	73.5 kN	65.5 kN
7215 BEGAY	NTN	73.5 kN	65.5 kN
BSA 215 CGA	NTN	72.0 kN	245.0 kN
BSA 215 CGB	NTN	72.0 kN	245.0 kN
7215 CD/P4A	NTN	71.5 kN	62.0 kN
7215 CDGA/HCP4A	NTN	71.5 kN	62.0 kN
7215 CDGA/P4A	NTN	71.5 kN	62.0 kN
7215 CDGB/P4A	NTN	71.5 kN	62.0 kN
7215 CDGC/P4A	NTN	71.5 kN	62.0 kN
S7215 CDGA/HCP4A	NTN	71.5 kN	62.0 kN
S7215 CDGA/P4A	NTN	71.5 kN	62.0 kN
7215 BEP	NTN	70.2 kN	60.0 kN
7215 ACD/P4A	NTN	68.9 kN	58.5 kN
7215 ACDGA/HCP4A	NTN	68.9 kN	58.5 kN
7215 ACDGA/P4A	NTN	68.9 kN	58.5 kN

Check before substituting — 96 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 215 ECP	NTN	150.0 kN	Type: Cylindrical — this part: Angular
N 215 ECP/C3	NTN	150.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 215 ECJ	NTN	150.0 kN	Type: Cylindrical — this part: Angular
NJ 215 ECM	NTN	150.0 kN	Type: Cylindrical — this part: Angular
NJ 215 ECML	NTN	150.0 kN	Type: Cylindrical — this part: Angular
NJ 215 ECML/C4	NTN	150.0 kN	Type: Cylindrical — this part: Angular Clearance: C4 — this part: CN (Normal)
NJ 215 ECP	NTN	150.0 kN	Type: Cylindrical — this part: Angular
NJ 215 ECP/C3	NTN	150.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 215 ECJ	NTN	150.0 kN	Type: Cylindrical — this part: Angular
NU 215 ECJ/C3	NTN	150.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 215 ECM	NTN	150.0 kN	Type: Cylindrical — this part: Angular
NU 215 ECM/C3	NTN	150.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7215ACDGC%2FP4A/SUBSTITUTE