NTN 7216 BECBY

Angular · Open

The seat — 80 MM × 140 MM × 26 MM

Bore

80 MM

Outside dia

140 MM

Width

26 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

85.0 kN

Static C0

75.0 kN

119 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 27 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 216 MA	NTN	146.0 kN	156.0 kN
QJ 216 N2MA	NTN	146.0 kN	156.0 kN
7216 CD/P4A	NTN	85.2 kN	75.0 kN
7216 CDGA/HCP4A	NTN	85.2 kN	75.0 kN
7216 CDGA/P4A	NTN	85.2 kN	75.0 kN
7216 CDGB/P4A	NTN	85.2 kN	75.0 kN
7216 CDGD/P4A	NTN	85.2 kN	75.0 kN
S7216 CDGA/P4A	NTN	85.2 kN	75.0 kN
7216 BECBJ	NTN	85.0 kN	75.0 kN
7216 BECBM	NTN	85.0 kN	75.0 kN
7216 BECBP	NTN	85.0 kN	75.0 kN
7216 BEGAM	NTN	85.0 kN	75.0 kN
7216 BEGAP	NTN	85.0 kN	75.0 kN
7216 BEGAPH	NTN	85.0 kN	75.0 kN
7216 ACD/HCP4A	NTN	81.9 kN	72.0 kN
7216 ACD/P4A	NTN	81.9 kN	72.0 kN
7216 ACDGA/P4A	NTN	81.9 kN	72.0 kN
7216 ACDGB/HCP4A	NTN	81.9 kN	72.0 kN
7216 ACDGB/P4A	NTN	81.9 kN	72.0 kN
7216 ACDGC/P4A	NTN	81.9 kN	72.0 kN

Check before substituting — 92 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 216 ECP	NTN	160.0 kN	Type: Cylindrical — this part: Angular
N 216 ECP/C3	NTN	160.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 216 ECJ	NTN	160.0 kN	Type: Cylindrical — this part: Angular
NJ 216 ECJ/C3	NTN	160.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 216 ECM	NTN	160.0 kN	Type: Cylindrical — this part: Angular
NJ 216 ECML	NTN	160.0 kN	Type: Cylindrical — this part: Angular
NJ 216 ECML/C4H	NTN	160.0 kN	Type: Cylindrical — this part: Angular Clearance: C4 — this part: CN (Normal)
NJ 216 ECP	NTN	160.0 kN	Type: Cylindrical — this part: Angular
NU 216 ECJ	NTN	160.0 kN	Type: Cylindrical — this part: Angular
NU 216 ECJ/C3	NTN	160.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 216 ECM	NTN	160.0 kN	Type: Cylindrical — this part: Angular
NU 216 ECM/C3	NTN	160.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7216BECBY/SUBSTITUTE