NTN 7221 ACDGA/P4A

Angular · Open

The seat — 105 MM × 190 MM × 36 MM

Bore

105 MM

Outside dia

190 MM

Width

36 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

163.0 kN

Static C0

146.0 kN

20 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 7 designations

Part number	Manufacturer	C	C0
7221 CDGA/P4A	NTN	172.0 kN	153.0 kN
7221 CDGB/P4A	NTN	172.0 kN	153.0 kN
7221 ACD/P4A	NTN	163.0 kN	146.0 kN
7221 ACDGB/P4A	NTN	163.0 kN	146.0 kN
7221 BECBM	NTN	156.0 kN	150.0 kN
7221 BECBP	NTN	156.0 kN	150.0 kN
7221 BEP	NTN	148.0 kN	137.0 kN

Check before substituting — 13 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 221 ECP	NTN	300.0 kN	Type: Cylindrical — this part: Angular
NJ 221 ECJ	NTN	300.0 kN	Type: Cylindrical — this part: Angular
NJ 221 ECML	NTN	300.0 kN	Type: Cylindrical — this part: Angular
NJ 221 ECP	NTN	300.0 kN	Type: Cylindrical — this part: Angular
NU 221 ECJ	NTN	300.0 kN	Type: Cylindrical — this part: Angular
NU 221 ECP	NTN	300.0 kN	Type: Cylindrical — this part: Angular
NU 221 ECP/C3	NTN	300.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NUP 221 ECML/C3	NTN	300.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NUP 221 ECP	NTN	300.0 kN	Type: Cylindrical — this part: Angular
6221	NTN	140.0 kN	Type: Deep groove ball — this part: Angular
6221-2Z	NTN	140.0 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
6221-2Z/C3	NTN	140.0 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7221ACDGA%2FP4A/SUBSTITUTE