Timken 7305

Angular · Open

The seat — 25 MM × 62 MM × 17 MM

Bore

25 MM

Outside dia

62 MM

Width

17 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

25.7 kN

Static C0

12.4 kN

115 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 13 designations

Part number	Manufacturer	C	C0
7305 ACCBM	NTN	29.0 kN	17.0 kN
BSA 305 CGA	NTN	28.5 kN	71.0 kN
BSA 305 CGB	NTN	28.5 kN	71.0 kN
7305 BECBM	NTN	26.5 kN	15.3 kN
7305 BECBP	NTN	26.5 kN	15.3 kN
7305 BECBY	NTN	26.5 kN	15.3 kN
7305 BEGAP	NTN	26.5 kN	15.3 kN
7305 BEGBP	NTN	26.5 kN	15.3 kN
7305 BEGBY	NTN	26.5 kN	15.3 kN
7305 B.TVP	FAG (Schaeffler)	26.3 kN	12.6 kN
7305 BEA	NTN	25.2 kN	12.1 kN
7305 BE-2RZP	NTN	24.2 kN	14.0 kN
7305 BEP	NTN	24.2 kN	14.0 kN

Check before substituting — 102 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
21305 CC	NTN	49.1 kN	Type: Spherical — this part: Angular
21305 CC/C3	NTN	49.1 kN	Type: Spherical — this part: Angular Clearance: C3 — this part: CN (Normal)
N 305 ECP	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NJ 305 ECJ	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NJ 305 ECML	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NJ 305 ECP	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NJ 305 ECP/C3	NTN	46.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 305 ECP/C4	NTN	46.5 kN	Type: Cylindrical — this part: Angular Clearance: C4 — this part: CN (Normal)
NU 305 ECJ	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NU 305 ECML	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NU 305 ECP	NTN	46.5 kN	Type: Cylindrical — this part: Angular
NU 305 ECP/C3	NTN	46.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7305/SUBSTITUTE