NTN 7306 BE-2RZP/GWF

Angular · Open

The seat — 30 MM × 72 MM × 19 MM

Bore

30 MM

Outside dia

72 MM

Width

19 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

32.5 kN

Static C0

19.3 kN

144 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 15 designations

Part number	Manufacturer	C	C0
QJ 306 MA	NTN	53.0 kN	41.5 kN
QJ 306 LA/P63	NTN	49.4 kN	38.0 kN
7306 ACCBM	NTN	39.0 kN	23.6 kN
7306 BECBM	NTN	35.5 kN	21.2 kN
7306 BECBP	NTN	35.5 kN	21.2 kN
7306 BECBY	NTN	35.5 kN	21.2 kN
7306 BEGAM	NTN	35.5 kN	21.2 kN
7306 BEGAP	NTN	35.5 kN	21.2 kN
7306 BEGBP	NTN	35.5 kN	21.2 kN
7306 BEGBY	NTN	35.5 kN	21.2 kN
7306 B.TVP	FAG (Schaeffler)	33.8 kN	17.6 kN
7306	Timken	33.2 kN	17.2 kN
7306 BE-2RZP	NTN	32.5 kN	19.3 kN
7306 BEA	NTN	32.5 kN	16.9 kN
7306 BEP	NTN	32.5 kN	19.3 kN

Check before substituting — 129 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
21306 CC	NTN	65.7 kN	Type: Spherical — this part: Angular
21306 CC/C3	NTN	65.7 kN	Type: Spherical — this part: Angular Clearance: C3 — this part: CN (Normal)
N 306 ECP	NTN	58.5 kN	Type: Cylindrical — this part: Angular
NJ 306 ECJ	NTN	58.5 kN	Type: Cylindrical — this part: Angular
NJ 306 ECJ/C3	NTN	58.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 306 ECM	NTN	58.5 kN	Type: Cylindrical — this part: Angular
NJ 306 ECML	NTN	58.5 kN	Type: Cylindrical — this part: Angular
NJ 306 ECP	NTN	58.5 kN	Type: Cylindrical — this part: Angular
NJ 306 ECP/C3	NTN	58.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 306 ECP/C4	NTN	58.5 kN	Type: Cylindrical — this part: Angular Clearance: C4 — this part: CN (Normal)
NU 306 ECJ	NTN	58.5 kN	Type: Cylindrical — this part: Angular
NU 306 ECJ/C3	NTN	58.5 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/7306BE-2RZP%2FGWF/SUBSTITUTE