NTN BB1-3341 A

Deep groove ball · Open

The seat — 85 MM × 180 MM × 41 MM

Bore

85 MM

Outside dia

180 MM

Width

41 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

140.0 kN

Static C0

96.5 kN

71 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 6 designations

Part number	Manufacturer	C	C0
6317 JEM	NTN	140.0 kN	96.5 kN
6317 M	NTN	140.0 kN	96.5 kN
6317 ZJEM	NTN	140.0 kN	96.5 kN
MRC.317S	NTN	140.0 kN	96.5 kN
MRC.317SFF	NTN	140.0 kN	96.5 kN
6317	NTN	129.0 kN	82.5 kN

Check before substituting — 65 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 317 ECM	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
N 317 ECP	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
N 317 ECP/C3	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 317 ECJ	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 317 ECM	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 317 ECM/C4VA301	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C4 — this part: CN (Normal)
NJ 317 ECP	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 317 ECP/C4	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C4 — this part: CN (Normal)
NU 317 ECJ	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 317 ECJ/C3	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 317 ECM	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 317 ECM/C3	NTN	340.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/BB1-3341A/SUBSTITUTE