NTN C 2211 TN9

Spherical · Open

The seat — 55 MM × 100 MM × 25 MM

Bore

55 MM

Outside dia

100 MM

Width

25 MM

Type

Spherical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

116.0 kN

Static C0

114.0 kN

47 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 15 designations

Part number	Manufacturer	C	C0
C 2211 KV	NTN	132.0 kN	134.0 kN
C 2211 V	NTN	132.0 kN	134.0 kN
22211 E	NTN	129.0 kN	127.0 kN
22211 EK	NTN	129.0 kN	127.0 kN
22211 EK/VA751	NTN	129.0 kN	127.0 kN
C 2211 KTN9	NTN	116.0 kN	114.0 kN
22211-E1-XL	FAG (Schaeffler)	112.0 kN	112.0 kN
22211CDE4	NSK	112.0 kN	112.0 kN
22211EJW33	Timken	112.0 kN	112.0 kN
22211EMD1	NTN	112.0 kN	112.0 kN
22211RHRK	KOYO (JTEKT)	112.0 kN	112.0 kN
22211/W33VA9A1	NTN	104.0 kN	122.0 kN
22211 K/W33VA9A1	NTN	104.0 kN	122.0 kN
22211 E1	FAG (Schaeffler)	96.6 kN	64.6 kN
22211	NTN	92.7 kN	62.1 kN

Check before substituting — 32 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
22211 E/C3	NTN	129.0 kN	Clearance: C3 — this part: CN (Normal)
22211 E/C4	NTN	129.0 kN	Clearance: C4 — this part: CN (Normal)
22211 EK/C3	NTN	129.0 kN	Clearance: C3 — this part: CN (Normal)
22211 EK/C4	NTN	129.0 kN	Clearance: C4 — this part: CN (Normal)
22211 EW/C3VQ335	NTN	129.0 kN	Clearance: C3 — this part: CN (Normal)
C 2211 KTN9/C3	NTN	116.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 2211 ECJ	NTN	114.0 kN	Type: Cylindrical — this part: Spherical
NJ 2211 ECM	NTN	114.0 kN	Type: Cylindrical — this part: Spherical
NJ 2211 ECML	NTN	114.0 kN	Type: Cylindrical — this part: Spherical
NJ 2211 ECML/C3	NTN	114.0 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)
NJ 2211 ECP	NTN	114.0 kN	Type: Cylindrical — this part: Spherical
NJ 2211 ECP/C3	NTN	114.0 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/C2211TN9/SUBSTITUTE