NTN C 3036 K

Spherical · Open

The seat — 180 MM × 280 MM × 74 MM

Bore

180 MM

Outside dia

280 MM

Width

74 MM

Type

Spherical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

880.0 kN

Static C0

1340.0 kN

18 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 5 designations

Part number	Manufacturer	C	C0
23036-2CS5/VT143	NTN	884.0 kN	1270.0 kN
23036-2CS5K/VT143	NTN	884.0 kN	1270.0 kN
23036 CC/W33	NTN	883.0 kN	1250.0 kN
23036 CCK/W33	NTN	883.0 kN	1250.0 kN
C 3036	NTN	880.0 kN	1340.0 kN

Check before substituting — 13 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
23036 CC/C2W33	NTN	883.0 kN	Clearance: C2 — this part: CN (Normal)
23036 CC/C3LW33	NTN	883.0 kN	Clearance: C3 — this part: CN (Normal)
23036 CC/C3W33	NTN	883.0 kN	Clearance: C3 — this part: CN (Normal)
23036 CC/C4W33	NTN	883.0 kN	Clearance: C4 — this part: CN (Normal)
23036 CCK/C3W33	NTN	883.0 kN	Clearance: C3 — this part: CN (Normal)
23036 CCK/C4W33	NTN	883.0 kN	Clearance: C4 — this part: CN (Normal)
23036 CCK/HA3C4W33	NTN	883.0 kN	Clearance: C4 — this part: CN (Normal)
NN 3036/SPW33	NTN	561.0 kN	Type: Cylindrical — this part: Spherical
NN 3036 K/SPC2W33	NTN	561.0 kN	Type: Cylindrical — this part: Spherical Clearance: C2 — this part: CN (Normal)
NN 3036 K/SPC3W33	NTN	561.0 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)
NN 3036 K/SPW33	NTN	561.0 kN	Type: Cylindrical — this part: Spherical
NN 3036 K/SPW33VS019	NTN	561.0 kN	Type: Cylindrical — this part: Spherical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/C3036K/SUBSTITUTE