NTN MRC.5305CG

Angular · Open

The seat — 25 MM × 62 MM × 25.40 MM

Bore

25 MM

Outside dia

62 MM

Width

25.40 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

30.7 kN

Static C0

20.4 kN

19 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 5 designations

Part number	Manufacturer	C	C0
3305 A	NTN	32.5 kN	22.0 kN
3305 ATN9	NTN	32.5 kN	22.0 kN
MRC.5305C	NTN	32.5 kN	22.0 kN
MRC.5305CFF	NTN	32.5 kN	22.0 kN
3305 ANR	NTN	30.7 kN	20.4 kN

Check before substituting — 14 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
3305 A-2RS1/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 A-2RS1/C3W64	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 A-2RS1TN9/C3MT33	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 A-2RS1TN9/MT33	NTN	32.5 kN	Seal: 2RS contact seal — this part: Open
3305 A-2Z	NTN	32.5 kN	Seal: 2Z shield — this part: Open
3305 A-2Z/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 A-2Z/C3MT33	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 A-2ZTN9/C3VT113	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 A-2ZTN9/MT33	NTN	32.5 kN	Seal: 2Z shield — this part: Open
3305 A/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
3305 ATN9/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
MRC.5305CZZ	NTN	32.5 kN	Seal: 2Z shield — this part: Open

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/MRC.5305CG/SUBSTITUTE