NTN N 1012 KPHA/HC5SPVR522

Cylindrical · Open

The seat — 60 MM × 95 MM × 18 MM

Bore

60 MM

Outside dia

95 MM

Width

18 MM

Type

Cylindrical

Seal

Open

Clearance

Precision

Dynamic C

40.2 kN

Static C0

49.0 kN

100 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 5 designations

Part number	Manufacturer	C	C0
N 1012 KTNHA/HC5SP	NTN	41.3 kN	51.0 kN
N 1012 KPHA/HC5SP	NTN	40.2 kN	49.0 kN
N 1012 KPHA/HC5SPVR592	NTN	40.2 kN	49.0 kN
NU 1012 MR/HC5C4	NTN	39.1 kN	46.5 kN
NU 1012 MR/HC5C4VA301	NTN	39.1 kN	46.5 kN

Check before substituting — 95 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1012 ECP	NTN	68.0 kN	Clearance: CN (Normal) — this part: C5
NU 1012 ML	NTN	43.0 kN	Clearance: CN (Normal) — this part: C5
N 1012 KTN/SP	NTN	42.9 kN	Clearance: CN (Normal) — this part: C5
N 1012 TN/SP	NTN	42.9 kN	Clearance: CN (Normal) — this part: C5
N 1012 KTNHA/SP	NTN	41.3 kN	Clearance: CN (Normal) — this part: C5
7012 CD/HCP4A	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5
7012 CD/P4A	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5
7012 CDGA/HCP4A	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5
7012 CDGA/P4A	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5
7012 CDGATP/P4B	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5
7012 CDGB/HCP4A	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5
7012 CDGB/P4A	NTN	40.3 kN	Type: Angular — this part: Cylindrical Clearance: CN (Normal) — this part: C5

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/N1012KPHA%2FHC5SPVR522/SUBSTITUTE