NTN N 1021 KTN9/SP

Cylindrical · Open

The seat — 105 MM × 160 MM × 26 MM

Bore

105 MM

Outside dia

160 MM

Width

26 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

110.0 kN

Static C0

153.0 kN

27 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 1 designation

Part number	Manufacturer	C	C0
NU 1021 ML	NTN	116.0 kN	137.0 kN

Check before substituting — 26 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1021 ML/C3	NTN	116.0 kN	Clearance: C3 — this part: CN (Normal)
N 1021 KTNHA/HC5SP	NTN	108.0 kN	Clearance: C5 — this part: CN (Normal)
7021 CD/P4A	NTN	95.6 kN	Type: Angular — this part: Cylindrical
7021 CDGA/HCP4A	NTN	95.6 kN	Type: Angular — this part: Cylindrical
7021 CDGA/P4A	NTN	95.6 kN	Type: Angular — this part: Cylindrical
7021 CDGB/P4A	NTN	95.6 kN	Type: Angular — this part: Cylindrical
S7021 CD/HCP4A	NTN	95.6 kN	Type: Angular — this part: Cylindrical
S7021 CDGA/P4A	NTN	95.6 kN	Type: Angular — this part: Cylindrical
7021 ACDGA/HCP4A	NTN	90.4 kN	Type: Angular — this part: Cylindrical
7021 ACDGA/P4A	NTN	90.4 kN	Type: Angular — this part: Cylindrical
7021 ACDGB/P4A	NTN	90.4 kN	Type: Angular — this part: Cylindrical
7021 ACDGC/P4A	NTN	90.4 kN	Type: Angular — this part: Cylindrical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/N1021KTN9%2FSP/SUBSTITUTE