NTN N 324 ECM

Cylindrical · Open

The seat — 120 MM × 260 MM × 55 MM

Bore

120 MM

Outside dia

260 MM

Width

55 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

610.0 kN

Static C0

620.0 kN

43 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 11 designations

Part number	Manufacturer	C	C0
N 324 ECP	NTN	610.0 kN	620.0 kN
NJ 324 ECJ	NTN	610.0 kN	620.0 kN
NJ 324 ECM	NTN	610.0 kN	620.0 kN
NU 324 ECJ	NTN	610.0 kN	620.0 kN
NU 324 ECM	NTN	610.0 kN	620.0 kN
NU 324 ECML	NTN	610.0 kN	620.0 kN
NU 324 ECP	NTN	610.0 kN	620.0 kN
NUP 324 ECJ	NTN	610.0 kN	620.0 kN
NU 324.M1	FAG (Schaeffler)	343.4 kN	313.1 kN
NU 324	Timken	336.6 kN	306.9 kN
NU 324 EM	NTN	329.8 kN	300.7 kN

Check before substituting — 32 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 324 ECM/C3	NTN	610.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 324 ECM/C4VA301	NTN	610.0 kN	Clearance: C4 — this part: CN (Normal)
NU 324 ECJ/C3	NTN	610.0 kN	Clearance: C3 — this part: CN (Normal)
NU 324 ECM/C3	NTN	610.0 kN	Clearance: C3 — this part: CN (Normal)
NU 324 ECM/C3VL0241	NTN	610.0 kN	Clearance: C3 — this part: CN (Normal)
NU 324 ECM/C4VA301	NTN	610.0 kN	Clearance: C4 — this part: CN (Normal)
NU 324 ECML/C3	NTN	610.0 kN	Clearance: C3 — this part: CN (Normal)
NU 324 ECP/C3	NTN	610.0 kN	Clearance: C3 — this part: CN (Normal)
QJ 324 N2MA	NTN	415.0 kN	Type: Angular — this part: Cylindrical
QJ 324 N2MA/C3	NTN	415.0 kN	Type: Angular — this part: Cylindrical Clearance: C3 — this part: CN (Normal)
7324 BCBM	NTN	238.0 kN	Type: Angular — this part: Cylindrical
7324 BGAM	NTN	238.0 kN	Type: Angular — this part: Cylindrical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/N324ECM/SUBSTITUTE