NTN N 326 ECM

Cylindrical · Open

The seat — 130 MM × 280 MM × 58 MM

Bore

130 MM

Outside dia

280 MM

Width

58 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

720.0 kN

Static C0

750.0 kN

25 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 8 designations

Part number	Manufacturer	C	C0
N 326 ECP	NTN	720.0 kN	750.0 kN
NJ 326 ECJ	NTN	720.0 kN	750.0 kN
NJ 326 ECM	NTN	720.0 kN	750.0 kN
NJ 326 ECML	NTN	720.0 kN	750.0 kN
NU 326 ECJ	NTN	720.0 kN	750.0 kN
NU 326 ECM	NTN	720.0 kN	750.0 kN
NU 326 ECML	NTN	720.0 kN	750.0 kN
NU 326 ECP	NTN	720.0 kN	750.0 kN

Check before substituting — 17 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 326 ECM/C4VA301	NTN	720.0 kN	Clearance: C4 — this part: CN (Normal)
NU 326 ECJ/C3	NTN	720.0 kN	Clearance: C3 — this part: CN (Normal)
NU 326 ECM/C3	NTN	720.0 kN	Clearance: C3 — this part: CN (Normal)
NU 326 ECM/C4VA301	NTN	720.0 kN	Clearance: C4 — this part: CN (Normal)
NU 326 ECP/C3	NTN	720.0 kN	Clearance: C3 — this part: CN (Normal)
QJ 326 N2MA	NTN	455.0 kN	Type: Angular — this part: Cylindrical
7326 BCBM	NTN	276.0 kN	Type: Angular — this part: Cylindrical
7326 BGAM	NTN	276.0 kN	Type: Angular — this part: Cylindrical
7326 BM	NTN	276.0 kN	Type: Angular — this part: Cylindrical
6326	NTN	229.0 kN	Type: Deep groove ball — this part: Cylindrical
6326/C3	NTN	229.0 kN	Type: Deep groove ball — this part: Cylindrical Clearance: C3 — this part: CN (Normal)
6326/C3VL2071	NTN	229.0 kN	Type: Deep groove ball — this part: Cylindrical Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/N326ECM/SUBSTITUTE