NTN NJ 22 EM

Cylindrical · Open

The seat — 110 MM × 200 MM × 38 MM

Bore

110 MM

Outside dia

200 MM

Width

38 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

202.7 kN

Static C0

175.1 kN

71 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 13 designations

Part number	Manufacturer	C	C0
N 222 ECM	NTN	335.0 kN	365.0 kN
N 222 ECP	NTN	335.0 kN	365.0 kN
NJ 222 ECJ	NTN	335.0 kN	365.0 kN
NJ 222 ECM	NTN	335.0 kN	365.0 kN
NJ 222 ECP	NTN	335.0 kN	365.0 kN
NU 222 ECJ	NTN	335.0 kN	365.0 kN
NU 222 ECM	NTN	335.0 kN	365.0 kN
NU 222 ECML	NTN	335.0 kN	365.0 kN
NU 222 ECP	NTN	335.0 kN	365.0 kN
NUP 222 ECP	NTN	335.0 kN	365.0 kN
NJ 22.M1	FAG (Schaeffler)	211.1 kN	182.3 kN
NJ 22 ECP	NTN	209.0 kN	180.5 kN
NJ 22	Timken	206.9 kN	178.7 kN

Check before substituting — 58 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 222 ECM/C3	NTN	335.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 222 ECML/C4	NTN	335.0 kN	Clearance: C4 — this part: CN (Normal)
NU 222 ECJ/C3	NTN	335.0 kN	Clearance: C3 — this part: CN (Normal)
NU 222 ECM/C3	NTN	335.0 kN	Clearance: C3 — this part: CN (Normal)
NU 222 ECM/C3VL0241	NTN	335.0 kN	Clearance: C3 — this part: CN (Normal)
NU 222 ECML/C4	NTN	335.0 kN	Clearance: C4 — this part: CN (Normal)
NU 222 ECP/C3	NTN	335.0 kN	Clearance: C3 — this part: CN (Normal)
QJ 222 N2MA	NTN	280.0 kN	Type: Angular — this part: Cylindrical
QJ 222 N2MA/C3	NTN	280.0 kN	Type: Angular — this part: Cylindrical Clearance: C3 — this part: CN (Normal)
QJ 222 N2MA/C4B20	NTN	280.0 kN	Type: Angular — this part: Cylindrical Clearance: C4 — this part: CN (Normal)
32022	NTN	228.9 kN	Type: Tapered — this part: Cylindrical Precision: P0 (Class4) — this part: P0
7222 CD/P4A	NTN	178.0 kN	Type: Angular — this part: Cylindrical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/NJ22EM/SUBSTITUTE