NTN NN 3018 KTN9/HC5SP

Cylindrical · Open

The seat — 90 MM × 140 MM × 37 MM

Bore

90 MM

Outside dia

140 MM

Width

37 MM

Type

Cylindrical

Seal

Open

Clearance

Precision

Dynamic C

138.0 kN

Static C0

216.0 kN

17 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 1 designation

Part number	Manufacturer	C	C0
NN 3018 KTN9/HC5SPW33	NTN	138.0 kN	216.0 kN

Check before substituting — 16 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NN 3018 KTN3/SP	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN3/SPW33	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/SP	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/SPVM127	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/SPVR521	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/SPVR522	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/SPW33	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/SPW33VR522	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/UP	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/UPVR522	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/VQ497	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5
NN 3018 KTN9/VQ554	NTN	138.0 kN	Clearance: CN (Normal) — this part: C5

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/NN3018KTN9%2FHC5SP/SUBSTITUTE