NTN NU 205 ECP

Cylindrical · Open

The seat — 25 MM × 52 MM × 15 MM

Bore

25 MM

Outside dia

52 MM

Width

15 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

32.5 kN

Static C0

27.0 kN

161 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 18 designations

Part number	Manufacturer	C	C0
BC1-0312	NTN	32.5 kN	27.0 kN
N 205 ECP	NTN	32.5 kN	27.0 kN
NJ 205 ECJ	NTN	32.5 kN	27.0 kN
NJ 205 ECML	NTN	32.5 kN	27.0 kN
NJ 205 ECP	NTN	32.5 kN	27.0 kN
NJ 205 ECPH	NTN	32.5 kN	27.0 kN
NU 205 ECML	NTN	32.5 kN	27.0 kN
NU 205 ECPHA	NTN	32.5 kN	27.0 kN
NUP 205 ECP	NTN	32.5 kN	27.0 kN
NU205	KOYO (JTEKT)	22.0 kN	18.6 kN
NU205-E-XL-TVP2	FAG (Schaeffler)	22.0 kN	18.6 kN
NU205EMA	Timken	22.0 kN	18.6 kN
NU205ET	NSK	22.0 kN	18.6 kN
NU205ET2X	NTN	22.0 kN	18.6 kN
NJ 05.M1	FAG (Schaeffler)	21.1 kN	15.0 kN
NJ 05 ECP	NTN	20.9 kN	14.8 kN
NJ 05	Timken	20.7 kN	14.7 kN
NJ 05 EM	NTN	20.3 kN	14.4 kN

Check before substituting — 143 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 205 ECP/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
NU 205 ECJ/C3M	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
NU 205 ECP/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
NUP 205 ECP/C3	NTN	32.5 kN	Clearance: C3 — this part: CN (Normal)
32005	NTN	28.2 kN	Type: Tapered — this part: Cylindrical Precision: P0 (Class4) — this part: P0
QJ 205 N2MA/C2L	NTN	27.0 kN	Type: Angular — this part: Cylindrical Clearance: C2 — this part: CN (Normal)
BSA 205 CGA	NTN	22.4 kN	Type: Angular — this part: Cylindrical
BSA 205 CGB	NTN	22.4 kN	Type: Angular — this part: Cylindrical
7205 ACCBM	NTN	18.0 kN	Type: Angular — this part: Cylindrical
6205 ETN9	NTN	17.8 kN	Type: Deep groove ball — this part: Cylindrical
7205 BECBM	NTN	15.6 kN	Type: Angular — this part: Cylindrical
7205 BECBPH	NTN	15.6 kN	Type: Angular — this part: Cylindrical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/NU205ECP/SUBSTITUTE