KOYO (JTEKT) NU207

Cylindrical · Open

The seat — 35 MM × 72 MM × 17 MM

Bore

35 MM

Outside dia

72 MM

Width

17 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

39.0 kN

Static C0

34.5 kN

169 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 24 designations · top 20 shown

Part number	Manufacturer	C	C0
N 207 ECM	NTN	56.0 kN	48.0 kN
N 207 ECP	NTN	56.0 kN	48.0 kN
NJ 207 ECJ	NTN	56.0 kN	48.0 kN
NJ 207 ECM	NTN	56.0 kN	48.0 kN
NJ 207 ECML	NTN	56.0 kN	48.0 kN
NJ 207 ECP	NTN	56.0 kN	48.0 kN
NJ 207 ECPH	NTN	56.0 kN	48.0 kN
NU 207 ECJ	NTN	56.0 kN	48.0 kN
NU 207 ECM	NTN	56.0 kN	48.0 kN
NU 207 ECML	NTN	56.0 kN	48.0 kN
NU 207 ECML/P63L	NTN	56.0 kN	48.0 kN
NU 207 ECP	NTN	56.0 kN	48.0 kN
NU 207 ECPH	NTN	56.0 kN	48.0 kN
NUP 207 ECJ	NTN	56.0 kN	48.0 kN
NUP 207 ECM	NTN	56.0 kN	48.0 kN
NUP 207 ECP	NTN	56.0 kN	48.0 kN
NU207-E-XL-TVP2	FAG (Schaeffler)	39.0 kN	34.5 kN
NU207EMA	Timken	39.0 kN	34.5 kN
NU207ET	NSK	39.0 kN	34.5 kN
NU207ET2X	NTN	39.0 kN	34.5 kN

Check before substituting — 145 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 207 ECJ/C3	NTN	56.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 207 ECP/C3	NTN	56.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 207 ECPH/C4	NTN	56.0 kN	Clearance: C4 — this part: CN (Normal)
NU 207 ECJ/C3	NTN	56.0 kN	Clearance: C3 — this part: CN (Normal)
NU 207 ECKP/C3	NTN	56.0 kN	Clearance: C3 — this part: CN (Normal)
NU 207 ECP/C3	NTN	56.0 kN	Clearance: C3 — this part: CN (Normal)
NUP 207 ECP/C3	NTN	56.0 kN	Clearance: C3 — this part: CN (Normal)
QJ 207 N2MA	NTN	49.0 kN	Type: Angular — this part: Cylindrical
QJ 207 N2MA/C2L	NTN	49.0 kN	Type: Angular — this part: Cylindrical Clearance: C2 — this part: CN (Normal)
32007	NTN	47.0 kN	Type: Tapered — this part: Cylindrical Precision: P0 (Class4) — this part: P0
QJ 207 MA/C2LS1	NTN	46.2 kN	Type: Angular — this part: Cylindrical Clearance: C2 — this part: CN (Normal)
BSA 207 CGA	NTN	36.5 kN	Type: Angular — this part: Cylindrical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/NU207/SUBSTITUTE