NTN NU 2308 ECML/C3

Cylindrical · Open

The seat — 40 MM × 90 MM × 33 MM

Bore

40 MM

Outside dia

90 MM

Width

33 MM

Type

Cylindrical

Seal

Open

Clearance

Precision

Dynamic C

129.0 kN

Static C0

120.0 kN

35 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 4 designations

Part number	Manufacturer	C	C0
NJ 2308 ECJ/C3	NTN	129.0 kN	120.0 kN
NJ 2308 ECML/C3	NTN	129.0 kN	120.0 kN
NJ 2308 ECP/C3	NTN	129.0 kN	120.0 kN
NU 2308 ECP/C3	NTN	129.0 kN	120.0 kN

Check before substituting — 31 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
22308 E	NTN	155.0 kN	Type: Spherical — this part: Cylindrical Clearance: CN (Normal) — this part: C3
22308 E/C2	NTN	155.0 kN	Type: Spherical — this part: Cylindrical Clearance: C2 — this part: C3
22308 E/C3	NTN	155.0 kN	Type: Spherical — this part: Cylindrical
22308 E/C4	NTN	155.0 kN	Type: Spherical — this part: Cylindrical Clearance: C4 — this part: C3
22308 E/VA405	NTN	155.0 kN	Type: Spherical — this part: Cylindrical Clearance: CN (Normal) — this part: C3
22308 EK	NTN	155.0 kN	Type: Spherical — this part: Cylindrical Clearance: CN (Normal) — this part: C3
22308 EK/C3	NTN	155.0 kN	Type: Spherical — this part: Cylindrical
22308 EN/VB238	NTN	155.0 kN	Type: Spherical — this part: Cylindrical Clearance: CN (Normal) — this part: C3
NJG 2308 VH	NTN	145.0 kN	Clearance: CN (Normal) — this part: C3
NJ 2308 ECJ	NTN	129.0 kN	Clearance: CN (Normal) — this part: C3
NJ 2308 ECML	NTN	129.0 kN	Clearance: CN (Normal) — this part: C3
NJ 2308 ECP	NTN	129.0 kN	Clearance: CN (Normal) — this part: C3

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/NU2308ECML%2FC3/SUBSTITUTE