NTN NUP 206 ECP

Cylindrical · Open

The seat — 30 MM × 62 MM × 16 MM

Bore

30 MM

Outside dia

62 MM

Width

16 MM

Type

Cylindrical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

44.0 kN

Static C0

36.5 kN

184 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 17 designations

Part number	Manufacturer	C	C0
N 206 ECP	NTN	44.0 kN	36.5 kN
NJ 206 ECJ	NTN	44.0 kN	36.5 kN
NJ 206 ECML	NTN	44.0 kN	36.5 kN
NJ 206 ECP	NTN	44.0 kN	36.5 kN
NU 206 ECJ	NTN	44.0 kN	36.5 kN
NU 206 ECML	NTN	44.0 kN	36.5 kN
NU 206 ECP	NTN	44.0 kN	36.5 kN
NU 206 ECPH	NTN	44.0 kN	36.5 kN
NU206	KOYO (JTEKT)	30.0 kN	26.5 kN
NU206-E-XL-TVP2	FAG (Schaeffler)	30.0 kN	26.5 kN
NU206EMA	Timken	30.0 kN	26.5 kN
NU206ET	NSK	30.0 kN	26.5 kN
NU206ET2X	NTN	30.0 kN	26.5 kN
NJ 06.M1	FAG (Schaeffler)	28.8 kN	20.0 kN
NJ 06 ECP	NTN	28.5 kN	19.8 kN
NJ 06	Timken	28.2 kN	19.6 kN
NJ 06 EM	NTN	27.6 kN	19.2 kN

Check before substituting — 167 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 206 ECJ/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 206 ECML/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 206 ECP/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
NU 206 ECJ/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
NU 206 ECKP/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
NU 206 ECP/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
NUP 206 ECP/C3	NTN	44.0 kN	Clearance: C3 — this part: CN (Normal)
QJ 206 MA	NTN	37.5 kN	Type: Angular — this part: Cylindrical
QJ 206 N2MA/C2L	NTN	37.5 kN	Type: Angular — this part: Cylindrical Clearance: C2 — this part: CN (Normal)
32006	NTN	36.9 kN	Type: Tapered — this part: Cylindrical Precision: P0 (Class4) — this part: P0
BSA 206 CGA	NTN	28.5 kN	Type: Angular — this part: Cylindrical
BSA 206 CGB	NTN	28.5 kN	Type: Angular — this part: Cylindrical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/NUP206ECP/SUBSTITUTE