NTN PER.6203-2RLDV2

Deep groove ball · Open

The seat — 17 MM × 40 MM × 12 MM

Bore

17 MM

Outside dia

40 MM

Width

12 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

9.6 kN

Static C0

4.8 kN

118 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 13 designations

Part number	Manufacturer	C	C0
6203-ZNR	NTN	9.9 kN	4.8 kN
6203 JEM	NTN	9.9 kN	4.8 kN
6203 NR	NTN	9.9 kN	4.8 kN
6203 NRJEM	NTN	9.9 kN	4.8 kN
6203 RSJEM	NTN	9.9 kN	4.8 kN
6203 ZJEM	NTN	9.9 kN	4.8 kN
BB1-0623 AG	NTN	9.9 kN	4.8 kN
PER.6203-2RLD10V2	NTN	9.6 kN	4.8 kN
PER.6203B-2RLD	NTN	9.6 kN	4.8 kN
203K	Timken	9.6 kN	4.8 kN
6203	NTN	9.6 kN	4.8 kN
W 6203	NTN	8.1 kN	4.8 kN
6203/VA201	NTN	—	4.8 kN

Check before substituting — 105 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 203 ECP	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball
N 203 ECPH	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 203 ECP	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 203 ECP/C3	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 203 ECP	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 203 ECP/C3	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NUP 203 ECP	NTN	20.0 kN	Type: Cylindrical — this part: Deep groove ball
32003	NTN	19.7 kN	Type: Tapered — this part: Deep groove ball Precision: P0 (Class4) — this part: ABEC-1 (P0)
QJ 203 N2MA	NTN	17.0 kN	Type: Angular — this part: Deep groove ball
QJ 203 N2MA/C2L	NTN	17.0 kN	Type: Angular — this part: Deep groove ball Clearance: C2 — this part: CN (Normal)
7203 BECBM	NTN	11.0 kN	Type: Angular — this part: Deep groove ball
7203 BECBP	NTN	11.0 kN	Type: Angular — this part: Deep groove ball

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/PER.6203-2RLDV2/SUBSTITUTE