NTN PER.6215-GNR-A

Deep groove ball · Open

The seat — 75 MM × 130 MM × 25 MM

Bore

75 MM

Outside dia

130 MM

Width

25 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

66.1 kN

Static C0

49.5 kN

124 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 20 designations

Part number	Manufacturer	C	C0
215	NTN	72.1 kN	72.0 kN
215-ZNR	NTN	72.1 kN	72.0 kN
215 NR	NTN	72.1 kN	72.0 kN
MRC.215M	NTN	72.1 kN	72.0 kN
MRC.215MF	NTN	72.1 kN	72.0 kN
MRC.215MFF	NTN	72.1 kN	72.0 kN
6215-ZNR	NTN	68.9 kN	49.0 kN
6215 JEM	NTN	68.9 kN	49.0 kN
6215 M	NTN	68.9 kN	49.0 kN
6215 N	NTN	68.9 kN	49.0 kN
6215 NR	NTN	68.9 kN	49.0 kN
6215 NRJEM	NTN	68.9 kN	49.0 kN
6215 RSJEM	NTN	68.9 kN	49.0 kN
6215 ZJEM	NTN	68.9 kN	49.0 kN
MRC.215S	NTN	68.9 kN	49.0 kN
MRC.215SFF	NTN	68.9 kN	49.0 kN
215K	Timken	66.3 kN	48.0 kN
6215	NTN	66.3 kN	48.0 kN
PER.6215-D-A	NTN	66.1 kN	49.5 kN
6215/VA201	NTN	—	49.0 kN

Check before substituting — 104 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 215 ECP	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
N 215 ECP/C3	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 215 ECJ	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 215 ECM	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 215 ECML	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 215 ECML/C4	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C4 — this part: CN (Normal)
NJ 215 ECP	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 215 ECP/C3	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 215 ECJ	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 215 ECJ/C3	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 215 ECM	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 215 ECM/C3	NTN	150.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/PER.6215-GNR-A/SUBSTITUTE