NTN S7011 ACDGA/P4A

Angular · Open

The seat — 55 MM × 90 MM × 18 MM

Bore

55 MM

Outside dia

90 MM

Width

18 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

37.1 kN

Static C0

31.0 kN

101 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 46 designations · top 20 shown

Part number	Manufacturer	C	C0
7011 CD/HCP4A	NTN	39.7 kN	32.5 kN
7011 CD/P4A	NTN	39.7 kN	32.5 kN
7011 CDGA/HCP4A	NTN	39.7 kN	32.5 kN
7011 CDGA/P4A	NTN	39.7 kN	32.5 kN
7011 CDGB/P4A	NTN	39.7 kN	32.5 kN
7011 CDGC/P4A	NTN	39.7 kN	32.5 kN
S7011 CD/P4A	NTN	39.7 kN	32.5 kN
S7011 CDGA/HCP4A	NTN	39.7 kN	32.5 kN
S7011 CDGA/P4A	NTN	39.7 kN	32.5 kN
S7011 CDGB/P4A	NTN	39.7 kN	32.5 kN
S7011 CDGC/P4A	NTN	39.7 kN	32.5 kN
7011 ACD/P4A	NTN	37.1 kN	31.0 kN
7011 ACDGA/HCP4A	NTN	37.1 kN	31.0 kN
7011 ACDGA/HCP4AL	NTN	37.1 kN	31.0 kN
7011 ACDGA/P4A	NTN	37.1 kN	31.0 kN
7011 ACDGB/P4A	NTN	37.1 kN	31.0 kN
7011 ACDGC/P4A	NTN	37.1 kN	31.0 kN
S7011 ACD/HCP4A	NTN	37.1 kN	31.0 kN
S7011 ACD/P4A	NTN	37.1 kN	31.0 kN
S7011 ACDGA/HCP4A	NTN	37.1 kN	31.0 kN

Check before substituting — 55 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 1011 ECP	NTN	65.5 kN	Type: Cylindrical — this part: Angular
NU 1011 ECP	NTN	65.5 kN	Type: Cylindrical — this part: Angular
NU 1011 ECMR/HC5C4VE104	NTN	59.4 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1011 KTN/HC5SP	NTN	40.2 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1011 KTN/SP	NTN	40.2 kN	Type: Cylindrical — this part: Angular
N 1011 TN/SP	NTN	40.2 kN	Type: Cylindrical — this part: Angular
N 1011 KTNHA/SP	NTN	39.1 kN	Type: Cylindrical — this part: Angular
N 1011 KPHA/HC5SP	NTN	37.4 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1011 KPHA/SP	NTN	37.4 kN	Type: Cylindrical — this part: Angular
N 1011 KPHA/SPVR521	NTN	37.4 kN	Type: Cylindrical — this part: Angular
N 1011 KPHA/SPVR522	NTN	37.4 kN	Type: Cylindrical — this part: Angular
N 1011 KPHA/SPVR592	NTN	37.4 kN	Type: Cylindrical — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/S7011ACDGA%2FP4A/SUBSTITUTE