NTN S7017 CEGA/HCP4A

Angular · Open

The seat — 85 MM × 130 MM × 22 MM

Bore

85 MM

Outside dia

130 MM

Width

22 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

34.5 kN

Static C0

29.0 kN

73 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 32 designations · top 20 shown

Part number	Manufacturer	C	C0
7017 CD/HCP4A	NTN	67.6 kN	65.5 kN
7017 CD/P4A	NTN	67.6 kN	65.5 kN
7017 CDGA/HCP4A	NTN	67.6 kN	65.5 kN
7017 CDGA/P4A	NTN	67.6 kN	65.5 kN
7017 CDGB/P4A	NTN	67.6 kN	65.5 kN
7017 CDGC/P4A	NTN	67.6 kN	65.5 kN
S7017 CDGA/HCP4A	NTN	67.6 kN	65.5 kN
S7017 CDGA/P4A	NTN	67.6 kN	65.5 kN
7017 ACD/P4A	NTN	63.7 kN	62.0 kN
7017 ACDGA/HCP4A	NTN	63.7 kN	62.0 kN
7017 ACDGA/HCP4AL	NTN	63.7 kN	62.0 kN
7017 ACDGA/P4A	NTN	63.7 kN	62.0 kN
7017 ACDGB/HCP4A	NTN	63.7 kN	62.0 kN
7017 ACDGB/P4A	NTN	63.7 kN	62.0 kN
7017 ACDGC/P4A	NTN	63.7 kN	62.0 kN
S7017 ACDGA/HCP4A	NTN	63.7 kN	62.0 kN
S7017 ACDGA/P4A	NTN	63.7 kN	62.0 kN
S7017 ACDGB/P4A	NTN	63.7 kN	62.0 kN
7017 CEGA/HCP4A	NTN	34.5 kN	29.0 kN
7017 CEGA/P4A	NTN	34.5 kN	29.0 kN

Check before substituting — 41 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
QJ 1017 N2MA/C4B20	NTN	99.5 kN	Clearance: C4 — this part: CN (Normal)
NJ 1017 ML	NTN	78.0 kN	Type: Cylindrical — this part: Angular
NU 1017 ML	NTN	78.0 kN	Type: Cylindrical — this part: Angular
NU 1017 ML/CNM	NTN	78.0 kN	Type: Cylindrical — this part: Angular
N 1017 KTN9/HC5SP	NTN	73.7 kN	Type: Cylindrical — this part: Angular Clearance: C5 — this part: CN (Normal)
N 1017 KTN9/SP	NTN	73.7 kN	Type: Cylindrical — this part: Angular
N 1017 KTN9/SPVR522	NTN	73.7 kN	Type: Cylindrical — this part: Angular
N 1017 TN9/SP	NTN	73.7 kN	Type: Cylindrical — this part: Angular
NU 1017 M/C3VA3091	NTN	72.1 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
6017-2RS1	NTN	52.0 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6017-2RS1/C3	NTN	52.0 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6017-2RS1/MTVM121	NTN	52.0 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/S7017CEGA%2FHCP4A/SUBSTITUTE