NTN S71909 ACEGA/HCP4A

Angular · Open

The seat — 45 MM × 68 MM × 12 MM

Bore

45 MM

Outside dia

68 MM

Width

12 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

9.8 kN

Static C0

6.4 kN

55 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 39 designations · top 20 shown

Part number	Manufacturer	C	C0
71909 CD/P4A	NTN	13.0 kN	9.5 kN
71909 CDGA/HCP4A	NTN	13.0 kN	9.5 kN
71909 CDGA/P4A	NTN	13.0 kN	9.5 kN
71909 CDGB/P4A	NTN	13.0 kN	9.5 kN
71909 CDGC/P4A	NTN	13.0 kN	9.5 kN
S71909 CDGA/HCP4A	NTN	13.0 kN	9.5 kN
S71909 CDGA/P4A	NTN	13.0 kN	9.5 kN
S71909 CDGB/P4A	NTN	13.0 kN	9.5 kN
S71909 CDGC/P4A	NTN	13.0 kN	9.5 kN
71909 ACD/P4A	NTN	12.4 kN	9.0 kN
71909 ACDGA/HCP4A	NTN	12.4 kN	9.0 kN
71909 ACDGA/P4A	NTN	12.4 kN	9.0 kN
71909 ACDGB/P4A	NTN	12.4 kN	9.0 kN
71909 ACDGC/P4A	NTN	12.4 kN	9.0 kN
S71909 ACD/P4A	NTN	12.4 kN	9.0 kN
S71909 ACDGA/HCP4A	NTN	12.4 kN	9.0 kN
S71909 ACDGA/P4A	NTN	12.4 kN	9.0 kN
S71909 ACDGB/P4A	NTN	12.4 kN	9.0 kN
71909 CE/P4A	NTN	10.4 kN	6.8 kN
71909 CEGA/HCP4A	NTN	10.4 kN	6.8 kN

Check before substituting — 16 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
61909	NTN	14.0 kN	Type: Deep groove ball — this part: Angular
61909-2RS1	NTN	14.0 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
61909-2RZ	NTN	14.0 kN	Type: Deep groove ball — this part: Angular
6909.2RSR	FAG (Schaeffler)	13.9 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6909.2ZR	FAG (Schaeffler)	13.9 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
6909.C3	FAG (Schaeffler)	13.9 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
6909-2RS1	NTN	13.8 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6909-2Z	NTN	13.8 kN	Type: Deep groove ball — this part: Angular Seal: 2Z shield — this part: Open
6909/C3	NTN	13.8 kN	Type: Deep groove ball — this part: Angular Clearance: C3 — this part: CN (Normal)
69092RS	Timken	13.7 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6909DDU	NSK	13.5 kN	Type: Deep groove ball — this part: Angular Seal: 2RS contact seal — this part: Open
6909	NTN	13.4 kN	Type: Deep groove ball — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/S71909ACEGA%2FHCP4A/SUBSTITUTE