NTN S71918 CEGA/HCP4A

Angular · Open

The seat — 90 MM × 125 MM × 18 MM

Bore

90 MM

Outside dia

125 MM

Width

18 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

30.7 kN

Static C0

24.0 kN

28 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 26 designations · top 20 shown

Part number	Manufacturer	C	C0
71918 CD/P4A	NTN	47.5 kN	51.0 kN
71918 CDGA/HCP4A	NTN	47.5 kN	51.0 kN
71918 CDGA/P4A	NTN	47.5 kN	51.0 kN
71918 CDGB/P4A	NTN	47.5 kN	51.0 kN
71918 CDGC/P4A	NTN	47.5 kN	51.0 kN
S71918 CDGA/HCP4A	NTN	47.5 kN	51.0 kN
S71918 CDGA/P4A	NTN	47.5 kN	51.0 kN
71918 ACD/P4A	NTN	44.2 kN	48.0 kN
71918 ACDGA/HCP4A	NTN	44.2 kN	48.0 kN
71918 ACDGA/HCP4AL	NTN	44.2 kN	48.0 kN
71918 ACDGA/P4A	NTN	44.2 kN	48.0 kN
71918 ACDGB/P4A	NTN	44.2 kN	48.0 kN
71918 ACDGC/P4A	NTN	44.2 kN	48.0 kN
S71918 ACDGA/HCP4A	NTN	44.2 kN	48.0 kN
S71918 ACDGA/P4A	NTN	44.2 kN	48.0 kN
71918 CE/HCP4A	NTN	30.7 kN	24.0 kN
71918 CEGA/HCP4A	NTN	30.7 kN	24.0 kN
71918 CEGA/P4A	NTN	30.7 kN	24.0 kN
S71918 CEGA/P4A	NTN	30.7 kN	24.0 kN
71918 FEGA/P4A	NTN	30.2 kN	24.0 kN

Check before substituting — 2 designations

Part number	Manufacturer	C	Differs from this part
61918	NTN	33.2 kN	Type: Deep groove ball — this part: Angular
PER.6918-G	NTN	32.8 kN	Type: Deep groove ball — this part: Angular

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/S71918CEGA%2FHCP4A/SUBSTITUTE