NTN S7214 CDGA/HCP4A

Angular · Open

The seat — 70 MM × 125 MM × 24 MM

Bore

70 MM

Outside dia

125 MM

Width

24 MM

Type

Angular

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

68.9 kN

Static C0

58.5 kN

127 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 29 designations · top 20 shown

Part number	Manufacturer	C	C0
QJ 214 N2MA	NTN	120.0 kN	122.0 kN
7214 ACCBM	NTN	83.0 kN	68.0 kN
7214 BECBJ	NTN	72.0 kN	60.0 kN
7214 BECBM	NTN	72.0 kN	60.0 kN
7214 BECBP	NTN	72.0 kN	60.0 kN
7214 BECBPH	NTN	72.0 kN	60.0 kN
7214 BECBY	NTN	72.0 kN	60.0 kN
7214 BEGAM	NTN	72.0 kN	60.0 kN
7214 BEGAP	NTN	72.0 kN	60.0 kN
7214 CD/HCP4A	NTN	68.9 kN	58.5 kN
7214 CD/P4A	NTN	68.9 kN	58.5 kN
7214 CDGA/HCP4A	NTN	68.9 kN	58.5 kN
7214 CDGA/P4A	NTN	68.9 kN	58.5 kN
7214 CDGB/P4A	NTN	68.9 kN	58.5 kN
7214 CDGC/P4A	NTN	68.9 kN	58.5 kN
7214 BECBM/W64	NTN	67.6 kN	56.0 kN
7214 BEGAF	NTN	67.6 kN	56.0 kN
7214 BEM1/VQ335	NTN	67.6 kN	56.0 kN
7214 BEP	NTN	67.6 kN	56.0 kN
7214 ACD/HCP4A	NTN	66.3 kN	55.0 kN

Check before substituting — 98 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 214 ECP	NTN	137.0 kN	Type: Cylindrical — this part: Angular
NJ 214 ECJ	NTN	137.0 kN	Type: Cylindrical — this part: Angular
NJ 214 ECJ/C3	NTN	137.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 214 ECM	NTN	137.0 kN	Type: Cylindrical — this part: Angular
NJ 214 ECM/C3	NTN	137.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NJ 214 ECML	NTN	137.0 kN	Type: Cylindrical — this part: Angular
NJ 214 ECML/C4	NTN	137.0 kN	Type: Cylindrical — this part: Angular Clearance: C4 — this part: CN (Normal)
NJ 214 ECML/C4H	NTN	137.0 kN	Type: Cylindrical — this part: Angular Clearance: C4 — this part: CN (Normal)
NJ 214 ECP	NTN	137.0 kN	Type: Cylindrical — this part: Angular
NJ 214 ECP/C3	NTN	137.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)
NU 214 ECJ	NTN	137.0 kN	Type: Cylindrical — this part: Angular
NU 214 ECJ/C3	NTN	137.0 kN	Type: Cylindrical — this part: Angular Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/S7214CDGA%2FHCP4A/SUBSTITUTE