NTN W 607-2RS1

Deep groove ball · 2RS contact seal

The seat — 7 MM × 19 MM × 6 MM

Bore

7 MM

Outside dia

19 MM

Width

6 MM

Type

Deep groove ball

Seal

2RS contact seal

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

1.5 kN

Static C0

0.6 kN

31 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 7 designations

Part number	Manufacturer	C	C0
607DD	MinebeaMitsumi (NMB)	2.6 kN	1.1 kN
607-2RSH	NTN	2.3 kN	0.9 kN
607-2RSH/LHT23	NTN	2.3 kN	0.9 kN
607-2RSL	NTN	2.3 kN	0.9 kN
607-RSH	NTN	2.3 kN	0.9 kN
DDRF-1970DD	MinebeaMitsumi (NMB)	2.2 kN	0.9 kN
W 607-2RS1/VT378	NTN	1.5 kN	0.6 kN

Check before substituting — 24 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
607SS	MinebeaMitsumi (NMB)	2.6 kN	Seal: Open — this part: 2RS contact seal
607ZZ	MinebeaMitsumi (NMB)	2.6 kN	Seal: 2Z shield — this part: 2RS contact seal
707 CDGA/P4A	NTN	2.5 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
707 ACD/HCP4AH	NTN	2.4 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
707 ACDGA/HCP4A	NTN	2.4 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
707 ACDGA/P4A	NTN	2.4 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
707 ACDGC/P4A	NTN	2.4 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2RS contact seal
607	NTN	2.3 kN	Seal: Open — this part: 2RS contact seal
607-2RSH/C3	NTN	2.3 kN	Seal: Open — this part: 2RS contact seal Clearance: C3 — this part: CN (Normal)
607-2RSLTN9/C3LT	NTN	2.3 kN	Seal: Open — this part: 2RS contact seal Clearance: C3 — this part: CN (Normal)
607-2Z	NTN	2.3 kN	Seal: 2Z shield — this part: 2RS contact seal
607-2Z/C3	NTN	2.3 kN	Seal: Open — this part: 2RS contact seal Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/W607-2RS1/SUBSTITUTE