What replaces FAG (Schaeffler) 6218?

The 6218 can be replaced by equivalent bearings from other manufacturers: Timken 6218, FAG (Schaeffler) 6218, NTN 6218, Timken 218K, KOYO (JTEKT) 6218. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6218?

The FAG (Schaeffler) 6218 has a bore diameter of 90.000mm, outer diameter of 160.000mm, and width of 30.000mm.

FAG (Schaeffler)

Bearing

6218

deep groove bearing, 90mm bore

Specifications

Bore (d)	90.000 mm
Outer Diameter (D)	160.000 mm
Width (B)	30.000 mm
Seal Type	Open
Bearing Type	Deep Groove
Dynamic Load (C)	96.600 kN
Static Load (C₀)	60.600 kN
Speed — Grease	3,000 RPM
Speed — Oil	3,800 RPM
Temperature Range	-30°C to 120°C
Rows	1

Cross-References(16)

Timken621890.000 mm × 160.000 mm × 30.000 mm
→
FAG (Schaeffler)621890.000 mm × 160.000 mm × 30.000 mm
→
NTN621890.000 mm × 160.000 mm × 30.000 mm
→
Timken218K90.000 mm × 160.000 mm × 30.000 mm
→
KOYO (JTEKT)621890.000 mm × 160.000 mm × 30.000 mm
→
NTN621890.000 mm × 160.000 mm × 30.000 mm
→
Timken218K90.000 mm × 160.000 mm × 30.000 mm
→
KOYO (JTEKT)621890.000 mm × 160.000 mm × 30.000 mm
→
NSK621890.000 mm × 160.000 mm × 30.000 mm
→
Timken621890.000 mm × 160.000 mm × 30.000 mm
→
NSK621890.000 mm × 160.000 mm × 30.000 mm
→
FAG (Schaeffler)621890.000 mm × 160.000 mm × 30.000 mm
→
SKF6218-2Z90.000 mm × 160.000 mm × 30.000 mm
→
SKF6218-2RSH90.000 mm × 160.000 mm × 30.000 mm
→
SKF6218-2Z90.000 mm × 160.000 mm × 30.000 mm
→
SKF6218-2RSH90.000 mm × 160.000 mm × 30.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →