What replaces MinebeaMitsumi (NMB) 6028/C3?

The 6028/C3 can be replaced by equivalent bearings from other manufacturers: NSK 6028C3, FAG (Schaeffler) 6028.C3, Timken 6028C3, NTN 6028C3, KOYO (JTEKT) 6028C3. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6028/C3?

The MinebeaMitsumi (NMB) 6028/C3 has a bore diameter of 140.000mm, outer diameter of 210.000mm, and width of 33.000mm.

MinebeaMitsumi (NMB)

Bearing

6028/C3

Name: MinebeaMitsumi (NMB) 6028/C3
Brand: MinebeaMitsumi (NMB)
SKU: 6028/C3

Deep groove ball bearing

Zoro ↗·Amazon ↗

Specifications

Bore (d)	140.000 mm
Outer Diameter (D)	210.000 mm
Width (B)	33.000 mm
Seal Type	c3
Bearing Type	Deep Groove
Dynamic Load (C)	111.000 kN
Static Load (C₀)	108.000 kN
Speed — Grease	6,700 RPM
Speed — Oil	4,000 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

NMB equivalent

Cross-References(20)

NSK6028C3140.000 mm × 210.000 mm × 33.000 mm
→
FAG (Schaeffler)6028.C3140.000 mm × 210.000 mm × 33.000 mm
→
Timken6028C3140.000 mm × 210.000 mm × 33.000 mm
→
NTN6028C3140.000 mm × 210.000 mm × 33.000 mm
→
KOYO (JTEKT)6028C3140.000 mm × 210.000 mm × 33.000 mm
→
NSK6028C3140.000 mm × 210.000 mm × 33.000 mm
→
FAG (Schaeffler)6028.C3140.000 mm × 210.000 mm × 33.000 mm
→
Timken6028C3140.000 mm × 210.000 mm × 33.000 mm
→
NTN6028C3140.000 mm × 210.000 mm × 33.000 mm
→
KOYO (JTEKT)6028C3140.000 mm × 210.000 mm × 33.000 mm
→
INA (Schaeffler)6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
MinebeaMitsumi (NMB)6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
RBC Bearings6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
Peer Bearing6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
Nachi Fujikoshi6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
NSK6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
NTN6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
FAG (Schaeffler)6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
Timken6028/C3140.000 mm × 210.000 mm × 33.000 mm
→
KOYO (JTEKT)6028/C3140.000 mm × 210.000 mm × 33.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →