SKF
Bearing7020 ACE/HCP4AL1
Super-precision, high-speed E design, single row angular contact ball bearing suitable for direct oil-air lubrication
Specifications
| Bore (d) | 100.000 mm |
| Outer Diameter (D) | 150.000 mm |
| Width (B) | 24.000 mm |
| Seal Type | Open |
| Bearing Type | Angular Contact |
| Dynamic Load (C) | 42.300 kN |
| Static Load (C₀) | 38.000 kN |
| Speed — Grease | 5,000 RPM |
| Speed — Oil | 6,700 RPM |
| Temperature Range | -30°C to 120°C |
| Rows | 1 |
| Clearance | CN/Normal |
These super-precision, high-speed E design, single row angular contact ball bearings, with 25° contact angle, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate very high speeds. Compared to the equivalent SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads. They have two lubrication holes, an annular groove, and two annular O-ring grooves in their outer rings.
Cross-References(10)
- NSK7020 ACE/HCP4AL1~$50.49→
- NTN7020 ACE/HCP4AL1~$48.75→
- FAG (Schaeffler)7020 ACE/HCP4AL1~$53.10→
- Timken7020 ACE/HCP4AL1~$51.36→
- KOYO (JTEKT)7020 ACE/HCP4AL1~$47.88→
- INA (Schaeffler)7020 ACE/HCP4AL1~$43.53→
- MinebeaMitsumi (NMB)7020 ACE/HCP4AL1~$43.53→
- RBC Bearings7020 ACE/HCP4AL1~$43.53→
- Peer Bearing7020 ACE/HCP4AL1~$43.53→
- Nachi Fujikoshi7020 ACE/HCP4AL1~$43.53→
Need help finding the right bearing?